Menu

Deckel Maho, DMG Deckel Maho DMC60T 5-Axis VMC 5 Axis

Ref : 1830658-3-AW
Condition : Used
Manufacturer : Deckel Maho, DMG
Model : Deckel Maho DMC60T 5-Axis VMC
Nb Of Axis : 5 Axis
Year(s) : 2004
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)
Last check : 13 Jul. 2019

2004 DMG Deckel Maho DMC60T 5-Axis VMC

Control: Heidenhain
Taper: 40
Equipped with Indexer or Rotary Table: No
Equipped with 5-Axis Capability: Yes

Equipped With:
-WORKING RANGE-
Traverse range X (longitudinal)…………………… 30.71″ (780 mm)
Traverse range Y (transverse)…………………….. 22.05″ (560 mm)
Traverse range Z (vertical)………………………. 22.05″ (560 mm)
Volume machining area………………………………….. 245 dm-3
Max workpiece dims 23.62″(600mm)diameter,22.64″(575mm)height,882lbs(400kg)

-ROTARY PALLET CHANGER WITH INTEGRATED NC ROTARY TABLE (C-AXIS)-
-Stable compact construction with optimal linkage to guideway (Y-Axis)
-NC rotary table with direct measuring system
-Backlash-free preloaded precision spur gear for high rigidity, precision
and high torque, maximum holding momentum in closed loop
-High rapid feed rate
-Note this machine is equipped w/the optional 100mm distnce T-slot pallets
-Pallet changer allows setup parallel to production time
Rotation range…………………. 360 x 0.001 degree (Full 4th Axis)
Clamping Surface………………….. 19.7″ x 24.8″ (500 mm x 630 mm)
Number of Pallets……………………………………………. 2
Maximum table load……………………………… 880 lbs (400 kg)
Centre bush…………………………………. 2″ (50 mm) diameter
Torque 40% duty cycle…………………….. 1,807 ft lbs (2,450 Nm)
Holding momentum 40%……………………… 1,807 ft lbs (2,450 Nm)
Maximum feed……………………………. 7,200 degrees per minute
Maximum table speed……………………………………… 30 rpm
Positional uncertainty P………………………………. 7 arc sec
Pallet change time………………………. Approximately 10 seconds


-SWIVEL MILLING HEAD WITH PROGRAMMABLE B-AXIS-
-Integrated 18,000 rpm motor spindle
-High pressure coolant supply centrally through spindle centre
Swivel Range………………………. 150 degrees (-120/+30 degrees)
(30 degrees past horizontal,horizontal,vertical,30 degrees past vertical)
150 degree swivel range allows UNDERCUTS and machining at NEGATIVE ANGLES
due to the swivel range of 30 degrees across the horizontal or vertical
axis.This gives you advanced flexibility for complex parts like impellers.

Swivel momentum milling spindle (40% duty cycle) 1,620 ft lbs (2,200 Nm)
Holding momentum without clamping (40% duty cycle) 1,438 ft lbs (1,950 Nm)
Holding momentum with clamping…………….. 2,655 ft lbs (3,600 Nm)
Rapid motion B-axis……………………………………… 35 rpm
Swivelling time of the head from horizontal-vertical & vice versa 1.5 secs
Positional uncertainty P…………………………… 9 arc seconds

-INTEGRATED MOTOR SPINDLE-
Type………………………………………. Digitally controlled
Cooled drive…………………………………………….. Water
Power 40% ED…………………………………… 37.55 hp (28 kW)
Power 100% ED…………………………………… 25.5 hp (19 kW)
Spindle speed range………………………………….. 18,000 rpm
Acceleration/deceleration 0-18,000 rpm………………….. 2 seconds
Number of gear steps………………………………………. None
Spindle torque 40% ED………………………….. 89 ft lb (121 Nm)
Spindle torque 100% ED……………………….. 60.48 ft lb (82 Nm)
Spindle bearing diameter (front/rear)……….. 3.15″/2.16″ (80/55 mm)
Spindle Taper…………………………………………… CAT 40
Clamping power……………………………………………. 8 kN

-FEED DRIVES-
Drive cooled X/Y/Z………………………………… Air/Air/Water
Feed Rate X/Y/Z………………………………. 590 ipm (15 m/min)
Rapid Feed Rate X/Y/Z……………………….. 1,968 ipm (50 m/min)
Maximum Feed Rate X/Y/Z……………………… 1,968 ipm (50 m/min)
ACCELERATION X/Y/Z…………………………….. 0.6 g IN ALL AXES
Feed Power X/Y/Z……………………………………. 7/7.2/10 kN
Ball Screw Spindle X/Y/Z 1.57″x0.8″ (40×20 mm) X&Y,1.97″x0.8″(50x20mm) Z

-60 POSITION VERTICAL CHAIN AUTOMATIC TOOL CHANGER-
Magazine pockets……………………………………………. 60
Maximum tool weight…………………………….. 17.64 lbs (8 kg)
Maximum tool diameter without free pockets…………… 3.15″ (80 mm)
Maximum tool diameter with free pockets……………… 6.3″ (160 mm)
Maximum tool length………………………………. 12.4″ (315 mm)
Tool change time Approximately 0.8 seconds, double gripper tool changer
Chip-to-chip time Approximately 4 seconds vertical, 10 seconds horizontal

-EXTERNAL COOLANT SUPPLY ON THE OUTSIDE OF THE SPINDLE-
Pump output………………………… 10.6 gallon/minute (40 l/min)
Pump pressure………………………………….. 22 PSI (1.5 bar)

-PRODUCTION PACKAGE-
-238 gallon (900 l) coolant unit capacity
-Automatic paperband filter cleaning with fine filtering of the complete
emulsion to less than 50 um
-Cleaning of the spindle taper CAT40 by spindle air blast for high
permanent precision also for cleaning with frequent tool changes
-580 PSI (40 bar) 6 gallon/min (23 l/min) coolant thru the spindle centre
-Rotating clear-view window in cabin pane
-Chip flushing inside work cabin
-Chip conveyor (scraper flight conveyor)

-INSTALLATION DATA-
Operation voltage….. 400 V input (comes with multi input transformer)
Control voltage…………………………………………… 24 V
Max at 100% duty cycle……………………………………. 100 A
Power consumption at 100% duty cycle………………………. 64 kVA
Recommended net protection………………………………… 100 A
Recommended short circuit……………………………….. 3.6 MVA
Compressed air required…………………………… 87 PSI (6 bar)
Air consumption (average value)…………………………. 20 m-3/h
Air consumption with tool cooling……………………….. 40 m-3/h
Total weight with pallet changer….. Approximately 22,000 lbs (9 tons)
3-point support with 3 leveling shoes, no special foundation required

-ITEMS TO SHIP-
DMG DMC60T: Approx 152″ L X 134″ W X 100″ H, 22,000 lbs
COOLANT TANK: Approx 90″ L X 56″ W X 66″ H, 1,500 lbs
CHIP CONVEYOR: Approx 127″ L X 27″ W X 77″ H, 1,000 lbs

-MACHINE IS EQUIPPED WITH-
Heidenhain Millplus iT CNC Control with electronic handwheel
Renishaw infrared parts measuring probe
BLUM Laser tool length and diameter measuring, horizontal/vertical
Air blast through spindle centre, selected with M-function
Spray pistol with pump
Heidenhain glass scales direct measuring system X/Y/Z Axes
Heidenhain rotary encoders direct measuring system B/C Axes
External coolant nozzles on outside of spindle air/coolant selectable
Automatic switch-off of positive air pressure for the main spindle after
work end
Linear roller guideways and digital drives. Stability and high precision
are ensured with roller guideways with over-dimensioned distances between
the guideways. The table centre of gravity moves in between the vertical
guideways (Z-Axis).
Electronic temperature compensation
Spindle chiller
Available books and manuals
Full enclosure of machining area for safety and noise reduction
Sensitive machine parts (measuring systems, limit switches, guide-ways,
drives) are seperate from the machining area
Automatic pallet changer