Engine Lathe 1500 rpm JMK 530

Turning length: 120 in
Turning diameter over bed: 21 in
Swing in gap: 28 in
Swing over cross slide: 13.125 in
Spindle bore: 3.125 in
Spindle mount: D1-8
Spindle power: 10 hp
Spindle speed: 25–1500 rpm
Inch threads: 4–56 TPI
Metric threads: 0.5–7 mm
Longitudinal feed: 0.0023–0.035 in/rev
Cross feed: 0.0012–0.017 in/rev
Tailstock taper: MT4
Tailstock travel: 6 in
Two-speed tailstock
12 in 3-jaw chuck
12 in 4-jaw chuck
16 in 4-jaw chuck
12 in 6-jaw chuck
14 in steady rest
3 × 6 in steady rests
Follower rest
Coolant system with full-length splash guard
Hardened ways
Thread dial
Foot brake
Can be inspected under power
Very good condition