Gleason 116 Variable Speed HYPOID SPIRAL BEVEL GEAR GENERATOR

GLEASON HYPOID SPIRAL BEVEL GEAR GENERATOR
116

Maximum full depth 1" (25.4MM)
Cone distance, maximum (30-DEGREE
Sprial angle & 12" diameter cutter 9" (30MM)
Max pitch angle (shafts at 90-deg) 84 DEGREES 18'
Min pitch angle (shafts at 90-deg) 5 DEGREES 42'
Extreme ratio (shafts at 90-deg) 10 TO 1
Operate with "formate" gears 2 TO 1
10 to 1 ratio 18" (460MM)
2 to 1 ratio 16" (406MM)
1 to 1 ratio 12.75" (324MM)
Max face width (depending on cutter) 2.75" (78MM)
Max./min. number of teeth 175 TO 5
Work spindle taper bore dia.(large end) 3.9" (100MM)
Depth of taper 6" 150MM)
Diameter of hole through spindle 3.06" (78MM)
Diameter of spindle nose 5.5" (140MM)
Cutter diameters utilized (150,190,230,305MM)
Workhead max offset above center 4.5" (114MM)
Workhead max offset below center 4.5" (114MM)
To nose of spindle 2.5" (63MM)
Cutter speeds 20 TO 115 RPM
Feeds (seconds per tooth) 9 TO 80 SECONDS
Feed motor 5 HP 1800 RPM
Hydraulic motor .75 HP 1800 RPM
Coolant motor .5 HP 3600 RPM
Floor space (1905 X 2896MM)
Machine net weight (10,773 KGS)