Platarg 912 TRANSFER PRESS

PLATARG TRANSFER PRESS
Model #912

Standard Flat Plate Lifter Cams
13 Stations, 12 Rams + 1 Slave
Standard CAMS - WWF type stage 6&8

6.50" (165 mm) long Stroke - checked and confirmed
3.11" (79mm) depth of draw
Screw type ram adjustment stages 1-4
Wedge Adjustment stages 5- 12
Stroke of CAMS Stage 1- 3.50" shut height 6.250"
Stage 2- 3.50" shut height 5.250"
Stages 3&4- 5.0" shut height 5.250"
Stages 5-12- 6.50" shut height 5.25"
8 ejector CAMS
Depth of draw 3.11" ( 79mm)
Platarg Single Roll Material Feed
Guillotine shear
Insert Finger Type Transfer Slide
Pressure Pad Assembly Fitted at Stage 2
8 Standard Stripper Arms Fitted stages 3 - 10
Safety clutch on side shaft
Full set of Die Blocks
Side Shaft Assembly with Dog Clutch
Air Cylinders
Variable Speed leeson AC drive drive 240 V
Taylor/Clutch/Brake Unit
Sure fire oil pump
40 - 80 SPM
25 HP motor 240/480V
Coolant tank on left side of press
Sound Proofed Guards
Platarg Electrical Control Panel - 240 volt
Platarg Transprobe Unit Mark3
Standard male thread tool holder
9 ejector cams 2-11