PSA20 High Speed Impact Shear

Ref : 2458322-3-MT
Condition : Used
Manufacturer : -
Model : PSA20
Short Description : High Speed Impact Shear
Year(s) : 1995
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

12.7mm NIKOM High Speed Impact Shear
2-Plane Straightener, 100 PM @ 2" Length
AGE: 1995

Machine designed to shear at a high rate of speed, greatly
reducing plastic deformation, resulting in clean,
burr-free, square and scrap-free cuts. Machine is
currently set-up to be feed from coil or could be made to
feed bars.

Diameter, Max.: 12.7mm (.500") Mild Steel
12mm (.472") Steel
15mm (.591") Copper, Brass and Aluminum
Can Cut Shapes with Custom Tooling

Feed Length, Min.: 1/2" (1) Die Thickness
Feed Length, Per Stroke, Max.: 15.75"
Feed Length, (3) Strokes, Max.: 47-1/4"

Production Rate: Approaching 100 PPM at 2" Length
(See Manufacturers PDF Output Chart)

Cutting Length Deviations, Standard: +/- .002mm
Impact Cylinder Provides 196 Nm of Energy (1,735 in./lbsF)
at a Piston Speed Maximum of 10 Meters/Sec.
Operating Air Pressure Required: 120 PSI


Sound Enclosure

2-Plane Straightener, 3 Over 4 Rolls Each Plane
For Feed Wire From Coils

Cutting Dies for (14) Different Diameters:

From 3/32" to 17/32" Diameter

Dies are 2-1/4" Sq. x 1" and are Reversible -
They can be used as many as (8) Times Between

Original Prints, Manual and Software Diskettes Included

CONDITION: Good, Takes Directly from Service

Other machines similar to PSA20 High Speed Impact Shear

Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2018
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2006
Location : EUROPE (Central and Eastern)
Year(s) : 1950
Location : EUROPE (Central and Eastern)
Year(s) : 1997