Menu

Running Sawmill

Ref : 2022026-15-MT
Condition : Used
Manufacturer : -
Model : -
Short Description : Running Sawmill
Year(s) : 1990
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)
Last check : 10 Jan. 2020

- 5 acres c/w 24 x 52 2-bedroom trailer
- Reman building 70 x 100; all steel; insulated
- Sawmill 30 x 175, partial steel & wood; 2 stories
- 600-volt electrics but many pieces of equipment are 460 volt
- Cut: Yellow cedar-50%, Fir-25%, Hemlock-25%
- Purchased logs on the open market and buys through government timber sales
- Has Category 2 license, can bid on Category 1 and 2 log sales
- Logs come 21 41 long to the mill
- Bucked on site (chainsaw)
- Diameters (tries to get larger diameter logs) 18 60

Sawmill
- Built in 1990
- Yellow cedar: 300 400,000 tree stakes per year
- Spindle blanks to Ontario
- 12,000 board feet of lumber per day with 4 people
- Infeed deck to Rosserhead
- Rosserhead is not hooked up. Needs $10,000.00 to finish electrical
- Can debark up to 20 x 48 then kicks across to infeed deck to the carriage line c/w log stop & loader
- Infeed deck to carriage
- Log turner hydraulic (4)
- 48 3 bunk Salem carriage, RH
- Salem setworks; air cylinders electronic activated. Wager electric clutches on bunks
- V and flat rail
- Hydraulic drive through cable 100 HP on hydraulic power unit
- Mechanical strain 6 Klamath headrig
- Single cut
- c/w clearing belt
- Worm drive on strain
- Cab & controls
- 200 HP ODP motor
- 6 saws with headrig, 13 wide x 39 long, 3/16 kerf
- Outfeed rollcase to edger transfer or can go straight through to green chain
- Infeed transfer to edger
- Collared Esser edger c/w 22 saws (1 fixed, 3 shifting, could be 4 shifting)
- Elworthy setworks
- Lasers - 1 fixed, 3 shifting via cables
- Outfeed rollcase onto landing deck transfer to conveyor, which fed another deck to green chain.
- Green chain 50 long x 20 wide c/w H78 chain

Small Log Line
- Forrestor model Tom Sawyer horizontal bandsaw system
- Will cut 27 diameter logs
- Can accommodate 40 material
- 30 HP motor, 460 V
- 5 HP on hydraulic
- c/w controls
- Digital setworks by Forrestor
- c/w dust bag for saw
- 2 4 wide saw blades can be used
- 25 saws @ 2 wide of which 4 or 5 are stellite
- Outfeed cross transfer to rollcase which ends up at the edger
- 30 Forano vibrating conveyor
- Soderhamn 48 chipper, 6 knife (in basement)
- 75 HP
- Horizontal in, bottom out
- Tub grinder for chipper knives
- Miscellaneous drag chain waste conveyors
- 18 x 18 hammer hog, 50 HP, 575 volt
- Drop feed c/w sheeting
- Bottom discharge
- Electrical MCCs
- Power distribution
- Transformers

Reman Plant
- Tilt hoist (18)
- Lumber transfer to two (2) only Doucet chop saws c/w stops
- Was being used to cut to length only (was not used to cut out knots)
- Maximum 12 wide x 5 depth of cut
- One (1) is new, one (1) is 5 years old
- Waste conveyor
- Blower for sawdust
- Transfer deck (heavy duty from pulp mill)
- Belt conveyor that took shorts
- Turner 42 tandem twin bandmill c/w 30 HP, 575 volt motors
- Side x side
- Straight splitting
- Air shift on infeed for different widths
- Second saw shifts with hydraulic cylinder
- SCM 3 rip saw, 30 HP, 460 volt
- 8 wide slat bed dip chain will take up to 13 saws
- Was running 5 saws
- 10 saws available
- Cantec vertical 32 bandmill
- 15 HP, 575 volt
- 2 wide bands
- Tilting table
- Wadkin FD9 6 head moulder
- 4 x 9
- Maximum 150 FPM, was being used at 50 FPM
- Fed with scissor lift, 3000 lbs
- 2 extra scissor lifts
- Wadkin profile grinder
- Some spare heads
- 2 Hobart welders, 300 amp
- Torches
- Plazma cutter
- All hand tools

Mobile Equipment
- 1973 966C Cat c/w grapple (also has bucket)
- 23.5 x 25 wheels
- 36 ply tires
- 8000 lb forklift, 1964 Hyster
- Propane
- 5000 lb Hyster, 1996
- Propane
- 4 cylinder GM motor

Other machines similar to Running Sawmill

1
Location : EUROPE (Western and Northern)
1
Location : EUROPE (Western and Northern)
1
Location : EUROPE (Western and Northern)
Year(s) : 2008
1
Location : EUROPE (Western and Northern)
Year(s) : 1992