SpeedPrint AccuFlex

BOARD HANDLING
Maximum Board Size (X x Y) 584mm x 508mm (23″ x 20″)
Minimum Board Size (X x Y) 75mm x 50mm (3″ x 2″)
Board Thickness 0.8mm to 5.0mm including warpage (0.03″ to 0.20″ ) 0.2mm – 3.8mm (0.008″ to 0.15″) – Optional
Maximum Board Weight 4.5kg (10 lbs.)
Minimum Board Edge Clearance 5mm (0.19″) 3mm (0.12″) – Optional
Maximum Underside Clearance 15mm (0.59″)
Transport Speed Adjustable Transport Height From Floor 860mm – 960mm (34″ – 38″)
Transport Track Feed Direction Left-to-Right, Right-to-Left, Left-to-Left and Right-to-Right
Triple Track Conveyor Lengths 1320mm (52″), 1524mm (60″), 1727mm (68″)
Method of Board Hold-Down Positive edge-clamps (front and rear)
Method of Board Support Independent, moveable magnetic support pins

PRINT PARAMETERS
Maximum Print Area (X x Y) 559mm x 498mm (22″ x 19.6″)
Snap-off Speed 0.2mm – 10mm/sec (0.008″ – 0.39″/sec)
Print Speed 5mm – 200mm/sec (0.2″ – 7.87″/sec)
Print Pressure Up to 20 kg (44 lbs)
Print Stroke 508mm (20″)
Stencil Frame Size 737mm x 737mm (29″ x 29″) standard
Smaller Frame Accommodations By use of optional Adapters

VISION
Vision Field-of-View (FOV) 10mm x 10mm (0.40″ x 0.40″)
Fiducial Types Standard shape fiducials. See SMEMA standards.
Camera System Single roving camera module with dual beam optics

PERFORMANCE
Vision Alignment Repeatability: +/- 0.025mm (+/-0.001″) at 6 sigma (Cp greater than or equal to 2.0*)
Vision Alignment Accuracy: +/-0.025mm (+/- 0.001” ) at 6 sigma (Cp greater than or equal to 2.0*)
Print Deposit Repeatability and Accuracy: +/- 0.050mm (+/- 0.002”) at 6 sigma (Cp greater than or equal to 2.0*)
(The higher the Cp, the lower the variability with respect to the process specification limits. In a process qualified as a 6 Sigma process
(i.e., one that allows plus or minus 6 standard deviations within the specification limits), the Cp is greater than or equal to 2.0)