Takasawa Fanuc 0i-TF Control CNC Conversational Manual Guide i 4,500 rpm TT-2100G 2 Axis

Takasawa TT-2100G
Year: 2022

Fanuc 0i-TF Control CNC Conversational Manual Guide i
Flat 140mm Spindle Nose
Spindle Motor: 15 HP | Max 4,500 rpm
Highly Rigid Box Guide Ways for X and Z axis
2 x 520W Coolant Pump (Upgraded from 250W)
Front Door Interlock
3-Color Signal Tower
Overhead Turn Over Device (includes 1 set of hand jaws)
1 x Enomoto Chip Conveyor (Rear Discharge Hinge Type)
Raku-Raku Tool Monitor Breakage Software
Takisawa Tool Counter/ Tool Life Management

All Work holding & Chucks Installed:
(2) 8" Hydraulic Chuck & Actuator | Kitagawa N-8 (3-jaw)
Programmable Chuck Open/Close (with 2 Proximity Switches)
Max. Spindle Speed upgraded from 3,200 to 4,500 rpm max.
(2) 10 Station Turret
(2) Face Tool Holder - 1.0" x 1.0"
(4) Round Tool Holder - Φ1.25"
(4) O.D. Tool Holder - 1.0" x 1.0"

Gantry Loader
Work Feeder (16 Pallets w/ 3 Pole Guide Bars)
Upgrade to 8" Spec MAX Ø 6.3" | L 3.15" | 6.6lb (x2)
NG Chute with Full Workpiece Sensor
Gantry Loader Air Blow - Coolant Blast
Chuck Open Close Control on Operation Panel Installed
Raku Raku Tool Breakage Monitor Software
Takasawa Tool Counter / Tool Life Management