TMP Up-Acting Presses

16” DIAMETER MAIN RAM WITH APPROX 6” STROKE.
TWO SIDE CYLINDERS FOR FAST CLOSE (USING A PREFILL VALVE) AND OPEN THAT ARE: 2.5” BORE; 1.375” DIA ROD; 6.5” STROKE.
DAYLIGHT IS APPROX 6.5”, 12.5” WITH HEATED PLATENS REMOVED.
DISTANCE BETWEEN THE POSTS: 22” L TO R X 10” F TO B.
OVERALL: 35” L TO R X 23” F TO B
HOWEVER THEY ARE SET UP WITH THE 20” X 20” ELECTRICALLY HEATED PLATENS.
THE LOWER HEATED PLATEN CAN BE SHUTTLED IN AND OUT WITH A 1.5” BORE.
28” STROKE CYLINDER (TABLE ON FRONT OF PRESS).
HEATED PLATENS ARE 20” X 20” X 2.5” EACH WITH TEN 0.5” CARTRIDGE HEATERS.
PLATENS DIVIDED INTO 2 ZONES (2 HEATERS ON EACH SIDE ARE THE “OUTER ZONE”; 6 HEATERS MAKE UP THE “INNER ZONE”.
EACH HEATER IS 1 KW AND 1.25 AMPS: 10 KW AND 12.5 AMPS PER HEATED PLATEN).
FULLY GUIDED ON 5” DIA POSTS WITH 6” BUSHINGS.
OPERATOR HEIGHT IS APPROX 39”; 35” WITHOUT PLATEN.

HYDRAULIC POWER UNIT:
50 GALLON FLOOR-STANDING TANK
7.5 HP MOTOR (208-230/460V; 1800 RPM)
HYDURA PISTON PUMP PVW-06D-LDAY-CNT07 WITH A 5.3 GPM GEAR PUMP
WATER-TYPE COOLER; VALVES; 6.5 GALLON ACCUMULATOR; ETC…

OVERALL DIMENSIONS OF PRESS APPROX: 40” L TO R X 86” F TO B INCLUDING SHUTTLE AND TABLE (48” WITHOUT) X 68” TALL.
OVERALL DIMENSIONS OF HYDRULIC UNIT APPROX: 64” X 52” X 76” TALL. NO CONTROLS. APPROX 14,000 POUNDS.