Menu

Wabash MIL150-3024-5TM Press

Ref : 2123927-6-GO
Condition : Used
Manufacturer : Wabash
Model : MIL150-3024-5TM
Short Description : Press
Year(s) : -
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

MANUAL IN-LINE LAMINATOR.
SET UP WITH FIVE 30” X 24” X 2” ELECTRICALLY HEATED PLATENS RESULTING IN FOUR 4” OPENINGS
(IF ALL PLATENS WERE REMOVED=27.5”; WITH ONE PAIR OF PLATENS=21.75”).
CLAMP CYLINDERS: TWO 8” BORE; 3.5” ROD DIAMETER; 16” MAX STROKE.
42” OPERATOR HEIGHT (WITH PLATEN).
FULLY GUIDED ON 3” DIA. POSTS.
ELECTRIC PLATENS: 14 CARTRIDGE HEATERS PER PLATEN
(24” X 0.625”; 240V; 1500 W-NOTE: TOP AND BOTTOM PLATENS ARE 1250 W) TWO-ZONES; 600F; 98,000 WATTS.
ELECTRICAL CONTROL SYSTEM: RELAY
10 TEMP CONTROLLERS
10 AMP GAGES; 480V SYSTEMS; 300 AMP DISCONNECT
TIMERS (HIGH PRESSURE; LOW PRESSURE; COLD PRESS)
PALM BUTTONS FOR HOT PRESS AND COLD PRESS (FRONT & REAR).
SELF-CONTAINED HYDRAULIC SYSTEM: 47 GALLON TANK; 5 HP MOTOR (1800 RPM); 39 GPM VANE PUMP;
0.57 GPM PISTON PUMP; WATER-TYPE HEAT EXCHANGER; ADJUSTABLE PRESSURE; ETC…
APPROX SPEEDS: 90 IPM CLOSING; 1.2 IPM PRESSING; 110 IPM OPENING.
PNEUMATIC COUNTER-BALANCE CYLINDERS ON HOT PRESS.
OPTIONAL COLD PRESS BEHIND THE HOT PRESS: 5” BORE CYLINDER WITH 18” STROKE; 1.5 HP 1800 RPM MOTOR; 4 GPM DOUBLE-A GEAR PUMP; 4 OPENINGS.
APPROX OVERALL DIMENSIONS: 72” X 72” X 98” TALL.
APPROX 18,000 POUNDS.
MANUAL AND PRINTS.

Other machines similar to Wabash MIL150-3024-5TM Press

7
Location : AMERICA North (USA-Canada-Mexico)
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2002
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2017
1
Location : AMERICA North (USA-Canada-Mexico)