Used Auxiliaries / Others Equipment for Extrusion
118 resultsAdditional information : Automatic thickness profile control for blown film line Automatic air ring. Inserts... Year(s) : 2010 Location : Italy
Price : On request
More detailsAdditional information : Extrusion head Macchi and automatic Thickness controll system Die Diam 500mm With... Year(s) : 2010 Location : Italy
Price : On request
More detailsused Cloeren Sheet Die 20" wide Upper integral flexible lip with micro adjustment Fixed removeable lower... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsused Cloeren Epoch IV manual 22" wide 3 Layer flex lip extrusion sheet die Upper integral flexible lip wi... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUsed 100 GAL GIRTON PW-100 S/S SWEEP JACKETED PROCESSOR 100 GALLON SINGLE MOTION SWEEP SURFACE PROCESSOR S... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsGallon Berlin Chapman Vertical Autoclave Mdl. D-547-1 Very Good Condition: Used for training purposes W... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBrand: Kice Industries Used Kice Industries Bottom Separator Cyclone Mdl. GD-15-LH CYCLONE 19" X 25" C/S K... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBrand: Pfaudler T-316L Polished Reactor 200 Gallons INTERNAL RATED 100 PSI AND FULL VACUUM @ 400`F. T-3... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details125 GAL NON AGITATED PROCESSOR KETTLE LEE METAL 40#JKT LEE TITLING 125 GALLON KETTLE STAINLESS STEEL CONST... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsGallon Kettle S/S Single Motion Agitated Processor ONE (1) USED LEE METAL PRODUCTS APPROXIMATELY 200 GAL... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsLegion Utensils Co. 40 gallon stainlesss steel jacketed tank Inner shell thickness .076, Radius 12.75 Oute... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBrand: Reg-Mac Densifier 50" OD X 47" DEEP CHAMBER 2 BLADE DESIGN, DRIVEN BY A 517 KW (690 HP) A/C MOTOR... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details14" Unit has three center back entrances Center entrance is 1.0" diameter and upper and lower entrances are 5... Year(s) : 1992 Location : United States (USA)
Price : On request
More detailsYear(s) : 1992 Location : United States (USA)
Price : On request
More detailsMSM Year(s) : 2000 Location : France
Price : On request
More detailsMax temperature 360 ° C 16kW heating capacity 90kW cooling capacity Location : France
Price : On request
More detailsDiameter 50 mm for SANDRETTO 220T NOVE T Location : EUROPE (Western and Northern)
Price : On request
More detailsSize 25mm Location : EUROPE (Western and Northern)
Price : On request
More detailsYear(s) : 1999 Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: SB MACHINERY POWER SUPPLY TYPE DESCRIPTION Sorting phase COMMISSIONING 2008 Year(s) : 2008 Location : EUROPE (Western and Northern)
Price : On request
More details<b>1x Italwork SC600 B2EL series 972, 1997</b> For soft handle Bag widths from 30 to 60 cm With gusset on... Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsComplete helicoid line consisting of heads, moulds, profiles for the production of PVC pipes ND600, ND800, ND1... Location : EUROPE (Western and Northern)
Price : On request
More detailsComplete testing equipment for pressure and sewer pipes Location : EUROPE (Western and Northern)
Price : On request
More detailsBATTENFELD X 3pieces Pvc Pipe Die Heads with full set of moulds and calibrators Existing m... Location : EUROPE (Western and Northern)
Price : On request
More detailsBATTENFELD Pvc Pipe Die Heads with full set of moulds and calibrators Existing moulds: ND1... Location : EUROPE (Western and Northern)
Price : On request
More detailsCINCINATTI Pvc Pipe Die Heads with full set of moulds and calibrators Existing mo... Location : EUROPE (Western and Northern)
Price : On request
More detailsANKER X 2pieces Pvc Pipe Die Heads with full set of moulds and calibrators Location : EUROPE (Western and Northern)
Price : On request
More detailsCINCINATTI X 2pieces Pvc Pipe Die Heads -with full set of moulds and calibrators Existing moulds:... Location : EUROPE (Western and Northern)
Price : On request
More detailsBlack Clawson 4000 mm Winder WIDTH STRETCH FILM FINISHED WEB WIDTH CAST STRETCH FILM LINE CAST STRETCH FI... Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More detailsVerbruggen Automatic flat die 2350 mm Thermo die bolts (oil cool circuit) Prepared for internal deckling d... Year(s) : 2007 Location : EUROPE (Western and Northern)
Price : On request
More detailsBaughan 2 belt haul off with free-standing rotary cutter 2 belt haul off with free-standing rotary cutter... Location : EUROPE (Western and Northern)
Price : On request
More details15" x 50" Individually Driven Belts, 2hp Vector Duty Motor 460/3/60 9.5 Amp, Nord Gearbox with 94.35:1 Ratio... Location : United States (USA)
Price : On request
More detailsTOWING FOR PVC PROFILES N. 2 tracks with chains and new rubber pads Tilting closing of the upper track Co... Location : EUROPE (Western and Northern)
Price : On request
More detailsMIXER 900 lt. Motor power: 5.5 kw Very good conditions Year(s) : 2002 Location : EUROPE (Western and Northern)
Price : On request
More detailsCutter For pipes Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: MACCHI MACCHI DIE For blown film die head 180 mm. inner diam. 340 mm. outer diam. Tongue and gr... Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: FBM FBM COLD MICROPERFORATOR MF3 Working width 2.300 mm. Roll width 2.360 mm. Pneumatic perforat... Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: GHIOLDI GHIOLDI width1200 mm. die 200 mm. screw diam. 60 mm. y.1995 GHIOLDI BLOWN FILM EXTRUDER S... Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: S.C.A.E. SLIT and SEAL unit for extrusion plants Manufacturer: S.C.A.E. Web width mm.1.650 Stre... Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: TECOM TECOM DIE Repairs Spare Parts for extruder for blow film extruder die head inner diam. 350... Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: FBF FBF HOT MICROPERFORATOR Working width 1600 mm. 10 kw motor New needles – diam. 0,9 mm. N.of... Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: Morlock Pad printing machine Model MD 125 L Location : EUROPE (Central and Eastern)
Price : On request
More detailsBrand: DEGA DEGA ASPIROPLAST AS 150 CE Vacuum feeding unit Construction year 2003 Single phase Year(s) : 2003 Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: DEGA DEGA ASPIROPLAST AS 150 Vacuum feeding unit Construction year 2003 Single phase 2 units av... Year(s) : 2003 Location : EUROPE (Western and Northern)
Price : On request
More detailsPneumatic punch for profiles Manufacturer: WEBER Type: PP-90 Year: 1993 Working speed: ap. 6 m/min Re... Year(s) : 1993 Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: TianTuo FRP Special Shaped Sheet Production Line Installation Size : 50/65*2/3*3.5 m (L*W*H) Product... Year(s) : 2015 Location : ASIA (China - Taiwan - HKG)
Price : USD1.00/Set
More detailsBrand: TianTuo Filming Embossing Machine Installation Size :3/5*2.5/4*2 m(L*W*H) Production Range :Embossed... Year(s) : 2015 Location : ASIA (China - Taiwan - HKG)
Price : USD1.00/Set
More detailsBrand: TianTuo FRP Carriage Plate Equipment Installation Size : 50-80*2/4*3.5m (L*W*H) Production Range : F... Year(s) : 2015 Location : ASIA (China - Taiwan - HKG)
Price : USD1.00/Set
More detailsBrand: Discharge table for profiles Support length: 2600 mm Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: CUCCOLINI Top mesh 3 mm (or 2 mm) opening Bottom mesh 60 micron opening Cleaning system with... Year(s) : 2014 Location : EUROPE (Central and Eastern)
Price : 6000
More details<b>1x Farris Take-off </b> 4″ x 24″ contact Both belts adjustable 2 HP Drive Package with 2 Speed Gearbo... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsExtrusion screw • 4.5" screw diameter • Approximately a 32:1 L/D ratio • Single stage, barrier type with... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details<b>1x Decatex Oscillating Nip, 1997</b> Cable guide, pivoting film guide, Oscillator Mod AR 1700 SA, Matr... Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBrand: gester GT-1990 extrusion head for 45mm extruder. Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: GESTER GT-1987 Laboratory extrusion line consists of: - Screw extruder 2 35mm diameter motor 5kw vari... Location : EUROPE (Western and Northern)
Price : On request
More detailsType: D: 300-700mm Kind of machine: Die for pipes Year: 2009 Material: PVC Product: Pipes Description: PVC pip... Year(s) : 2009 Location : EUROPE (Western and Northern)
Price : On request
More detailsManufacturer: Technomatic Type: TA040-E00L3 Kind of machine: Die for pipes Year: 2006 Material: PVC Produ... Year(s) : 2006 Location : EUROPE (Western and Northern)
Price : On request
More detailsSICA 50 - 250 mm PIPE PULLER Type S.I.C.A C 50 - 250 mm Capacity 50-250mm Location : EUROPE (Western and Northern)
Price : On request
More details94" EDI Extrusion Dies Autoflex H40 Sheet Die Approximately 4" wide x 3/4" tall back center feed Lip opening... Year(s) : 1990 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details90" EDI Extrusion Dies Autoflex H40C Sheet Die Approximately 4" wide x 3/4" tall back center feed Lip open... Year(s) : 1985 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsEgan 84" Wide Sheet Die Back center feed Description 84" Egan Sheet Die Back center feed Weight 2600,... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details98" EDI Extrusion Die Autoflex H40 Sheet Die Description 98" EDI Extrusion Dies Autoflex H40 Sheet Di... Year(s) : 1991 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details86" EDI Extrusion Dies Autoflex H40C Sheet Die. Approximately 4" wide x 3/4" tall back center feed. Lip ope... Year(s) : 1984 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details84" Egan Extrusion Dies Back center feed Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details85" EDI Extrusion Dies Autoflex H40C Sheet Die Approximately 4" wide x 3/4" tall back center feed Lip openi... Year(s) : 1985 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details73" EDI Extrusion Dies Autoflex H40 Sheet Die Approximately 4" wide x 3/4" tall back center feed Lip openin... Year(s) : 1991 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsEgan 84" Wide Sheet Die Back center feed Description 84" Egan Sheet Die Back center feed Weight 2600,... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsPlastic Extrusion Machinery 325 Extrusion Profile Puller Year 1996 Motor 3 HP DC Motor (magnet)... Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBrand: Plastic regranulation Brand: Plastic regranulation Plastic extrusion regranulation line cap.nn Year(s) : 1 Location : EUROPE (Central and Eastern)
Price : 5000 EUR
More detailsBrand: Gester Head cut in water for extruder 120 mm Location : EUROPE (Western and Northern)
Price : On request
More detailsCast film die Cloeren 2650 Year: 1998 Description: width 2650 mm fitted with internal deckling... Year(s) : 1998 Location : EUROPE (Western and Northern)
Price : On request
More detailsCast film die – EDI Ultraflex XR 40 Description: 2450 mm mono Manual adjustment Previou... Location : EUROPE (Western and Northern)
Price : On request
More detailsMelt pump/screen changer Maag TU56/36 Year: 2004 Description: up to 385 kg/hour Volume per rot... Year(s) : 2004 Location : EUROPE (Western and Northern)
Price : On request
More detailsMelt pump/screen changer Maag TU56/36 Year: 2005 Description: up to 385 kg/hour Volume per rot... Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More detailsanufacturer: Reifenhäuser contact length: 2100mm track width: 250mm year: 1991 drive: 2,2kw - 380V/50Hz. Year(s) : 1991 Location : EUROPE (Western and Northern)
Price : On request
More detailsmanufacturer: Reifenhäuser contact length: 1900mm track width: 200mm year: 1991 drive: 2,2kw - 380V/50Hz. Year(s) : 1991 Location : EUROPE (Western and Northern)
Price : On request
More detailsvacuum pump Rietschle VLB 100 Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: Hoecker Höcker Polytechnik exhaustion Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: Sihi vacuum pump sihi manufacturer: sihi drive: 5,5kw rotation speed: 1440/min Location : EUROPE (Western and Northern)
Price : On request
More detailsBrand: Kontra combination separator with flying saw manufacturer: Kontra Anlagentechnik year: 2005 saw bla... Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More detailsmanufacturer: Vobau type: 301-2-150TF year: 1981 drive: 7,1 kw 2 vacuumpumps waterbath stainless steel l... Year(s) : 1981 Location : EUROPE (Western and Northern)
Price : On request
More detailsmanufacturer: Battenfeld type: K400V4 year:1988 drive: 20kw 4 vacuumpumps waterbath stainless steal l: 4... Year(s) : 1988 Location : EUROPE (Western and Northern)
Price : On request
More detailsmanufacturer: Vobau type: 332-4-7402 year:1981 drive: 23,1 kw 4 vacuumpumps a 5,5kW waterbath stainless s... Year(s) : 1981 Location : EUROPE (Western and Northern)
Price : On request
More detailsManufacturer: INOEX 90KB-06-G / 91108720 Year of construction: 1995 Description: Ultrasonic measuring IN... Year(s) : 1995 Location : EUROPE (Western and Northern)
Price : 5,500
More details<b>Model: Suomi</b> <u><b>Pipe Winding Machine</b></u> <b>Description:</b> • used • Coiler • Tube cutte... Location : EUROPE (Western and Northern)
Price : € 5.500
More detailsManufacturer: Johnson Model: 48 Die Size: 1220mm(Width) For Extrusion (Sheet) Rear Entry Circular Fee... Location : OCEANIA
Price : On request
More detailsManufacturer: EDI Sheet Die Model: Autoflex AFII H40C Size: 94" Appr 2" diameter back center feed Li... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: Edi Sheet Die • Size: 86" • Coat hanger design • 2.5" bolt spacing center to center • Oval inle... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBrand: Extrusion screw • 4.5" screw diameter • Approximately 30:1 L/D ratio • Single stage, barrier ty... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBrand: Extrusion screw • 4.5" screw diameter • Approximately a 32:1 L/D ratio • Single stage, barrier... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: Gloucester 10 zone heat control panel • Year: 1987 • Missing temperature controllers • Ha... Year(s) : 1987 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: GEC Extrol control system • Year: 1990 • Still installed to sell separate from line Year(s) : 1990 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: Egan Manual sheet die • Size: 64" • 2" bolt ceneters • External deckling Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: Egan Sheet Die • Size: 96" wide • 2" bolt spacing • Oval back feed • Air knife/ vacuum b... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: EDI Auto Flex sheet die • Size: 90" • With heaters Lip Range 1 mm-30mm rated at 1,500lbs-2... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: Egan Sheet Die • Size: 80" • With die block • 1" bolt spacing • 119570 stamped on die •... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: Egan Cast Film Die • Size: 78" • Center back feed entrance Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: Black Clawson Sheet Die • Size: 78" • Bolt spacing 2" • Round inlet, 72-140, L-2234-72 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: EDI Model: H75 Autoflex Sheet Die • Size: 38" • Center back fed entrance with micro adju... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsManufacturer: Egan Primary Nip • Size: 74" • With 1HP drive • Consisting of 1)chrome & 1)rubber roll-6... Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details