Used Screw Extruders

Screw Diameter 8" Vented Non Vented Cooling Gear box and barrel throat uses water, 1" NPT with heat exchanger Year(s) : 2020 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

112mm parallel counter rotating twin screw plastic extruder. Screw length approximately 3020mm long x 112mm Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

80mm conical counter rotating twin screw plastic extruder. Screw length approximately 1,665mm long x 80mm dia Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Counter rotating twin screw extruder. Conical screw design. Barrel is electrically heated and air cooled in Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER REBUILT – approximately 43″ centerline height, gearbox havin Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 67mm Location : AMERICA North (USA-Canada-Mexico)

Price : On request

30mm extruder. Having a 24:1 L/D ratio at a 40.5″ centerline height. Unit has two (2) zone electrically heat Location : AMERICA North (USA-Canada-Mexico)

Price : On request

30mm pedestal extruder. Having a 20:1 L/D ratio. Unit has an electrically heated and non-vented barrel. Sin Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

25mm pedestal extruder. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, Location : AMERICA North (USA-Canada-Mexico)

Price : On request

30mm Deltaplast model DVH 30. 125:24 pedestal extruder. Having a 24:1 L/D ratio. Unit has a three (3) zone e Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.5" Davis Standard Extruder Water Cooled 75HP Location : AMERICA North (USA-Canada-Mexico)

Price : On request

10" To 6" AET Dual Diameter Extruder 32:1 L/D, Vented Barrel, 4140 SAE Barrel Bimetallic Liner, 10" Diameter Location : AMERICA North (USA-Canada-Mexico)

Price : On request

75mm Twin screw rubber extruder Model TEM 75ss tse 750 HP Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6” NRM Extruder, Approximate 43” centerline height, gearbox having new bearings (less thrust) and seals with Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.5" Davis Standard 24/1 L/D Non-Vented Extruder With Electrically Heated Air Cooled Barrel Belt driven by 60 Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Type Screw Single screw Screw diameter 30 mm L/D ratio 20 L/D Motor power 3 kW Control Voltage 220 V Connectio Year(s) : 1983 Location : EUROPE (Western and Northern)

Price : On request

Small batch production with Monobloc extruder. Good working condition. Type: Locati Pavesi Monobloc Materials Location : EUROPE (Western and Northern)

Price : On request

Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. 28:1 L/D five (5) zone electrica Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

C.W. Brabender Independent Table Top Extruder. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Brand jennings Cylinder: 4″ Stroke: 36″ 50 Ton Electrical Requirements Extruder: Power: 208V / 40Amps / 60Hz Year(s) : 2021 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model 250 24:1 NVLH Screw Size 2.5" Voltage 460 Volt 3 Phase 60 Hz Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 3.5" Motor 75 HP Gear Ratio 17.43:1 Voltage 460 Volt 3 Phase 60 Hz Year(s) : 1971 Location : AMERICA North (USA-Canada-Mexico)

Price : On request