Used Screw Extruders

Type Screw Single screw Screw diameter 30 mm L/D ratio 20 L/D Motor power 3 kW Control Voltage 220 V Connectio Year(s) : 1983 Location : EUROPE (Western and Northern)

Price : On request

Small batch production with Monobloc extruder. Good working condition. Type: Locati Pavesi Monobloc Materials Location : EUROPE (Western and Northern)

Price : On request

Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. 28:1 L/D five (5) zone electrica Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

C.W. Brabender Independent Table Top Extruder. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Brand jennings Cylinder: 4″ Stroke: 36″ 50 Ton Electrical Requirements Extruder: Power: 208V / 40Amps / 60Hz Year(s) : 2021 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model 250 24:1 NVLH Screw Size 2.5" Voltage 460 Volt 3 Phase 60 Hz Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Size 3.5" Motor 75 HP Gear Ratio 17.43:1 Voltage 460 Volt 3 Phase 60 Hz Year(s) : 1971 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Extruder has 30:1 L/D ratio with a six (6) zone electrically, heated air cooled, and non-vented barrel at a 4 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Type Screw Conical Double Screw Machine hours 64.082 hours Screw Diameter 45 mm Motor Power 17.5 kw Dimensions Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" cen Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Dri Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6" extruder no model numbe 30:1 L/D Electrically heated water cooled 6 zone vented barrel with screw and clamp Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4.5" 30:1 L/D Extruder Having an electrically heated, air cooled, and non-vented barrel at an approximate 56" Year(s) : 1980 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4.5" Davis Standard cold feed rubber extruder new 2003. Has a 20/1 L/D, vented/plugged barrel, electrically Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model number 233-011 Electrically heated air cooled vented & plugged barrel on a 42.5" centerline, free stand Location : AMERICA North (USA-Canada-Mexico)

Price : On request

32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Drive Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Diameter 8" L/D Ratio 38:1 Cooling Water Motor 700 HP General Electric DC Centerline Height 61" Gea Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Single screw extruder Type: Elipse C40-26DL Year(s) : 2011 Location : EUROPE (Western and Northern)

Price : On request

Secondhand plastic double screw extruder with screw diameter of 38 mm with degassing unit. Machine is in grea Location : EUROPE (Western and Northern)

Price : On request

55MM Leistritz ZSE 50 GG Counter-Rotating Twin Screw Extruder 300 RPM Screw Speed 44:1 L/D Ratio, 10 Barrel Se Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

18mm Leistritz Twin Screw Extruder, Co Rotating 6 Barrel Segments, 2.3 Kw Motor, Direct Drive, 8.948:1 Gear Ra Location : AMERICA North (USA-Canada-Mexico)

Price : On request