Used Texturizing machines90 results
Yarn Texturizing 240 spindles M Type Single owen, sensor Installed and running situation. Year(s) : 1997 Location : MIDDLE EAST
72 position All position working Zero spare parts will also be given. There is an extra USD 10,000 new spare m... Year(s) : 2007 Location : MIDDLE EAST
NUMBER 25 POSITIONS ROTARY CREEL FORNACE 150MM RUNNING CONDICTIONS LOCATION EUROPE Year(s) : 2007 Location : EUROPE (Western and Northern)
Texturizing Machine No.of Position: 216 Pos. Speed: Max. 1200m/min Denier Range:30~300 Den. S or Z Textur... Year(s) : 1997, 1999 Location : ASIA (China - Taiwan - HKG)
2 x Barmag AFK-6 216 Sp, 2 Heaters each Year 1995 (Fully reconditioned 2018) Single Creels Year(s) : 1995 Location : ASIA (China - Taiwan - HKG)
Model RM3T 24 Positions SSM Digicone Precision Take up Winder 10" Tube Take Up 6 Heated Godets Per Position 4"... Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)
Model RM2T 12 Positions Each SSM Digicone Precision Take up Winder 10" Tube Take Up 6 Heated Godets Per Positi... Year(s) : 2001 Location : AMERICA North (USA-Canada-Mexico)
Techniservice Airtex Texturizers with Leesona winders. Currently producing turf thatch yarns. Voltage is 400... Year(s) : 2008, 2013 Location : AMERICA North (USA-Canada-Mexico)
240 spindles 2003/2004 years RUNNING condition All of them is still running in mill Year(s) : 2003, 2004 Location : ASIA (China - Taiwan - HKG)
2 sets FK6-1000V with 240 spindles Year(s) : 2003 Location : ASIA (China - Taiwan - HKG)
1 x Barmag FK6-900 of 216 positions (of which 168 installed and working – rest in warehouse as not needed cap... Year(s) : 1990 Location : EUROPE (Central and Eastern)
168 positions The SDX3 texturizer is particularly suitable for texturing PES yarns up to 330 dtex multi and mi... Year(s) : 1999 Location : EUROPE (Western and Northern)
108 positions each wiring diagram FK6-25-394P yarn clearer type CA9-T D221, 575v/60hz multi-package transfer c... Year(s) : 1977 Location : AMERICA North (USA-Canada-Mexico)
Dietze Schell Model DS200G texturizers. Year 1998. 480v/3Ph/60Hz. 10 available Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)
BARMAG DTY Texturizing Machine Model MPS-V HT1 2004 120 positions, 10 sections w/ individual settings each se... Year(s) : 2004, 2005 Location : MIDDLE EAST
We have 8 BARMAG FK6-1000 for sale; 5 machines 1998 model ( 3 M , 2 V type ) 2 machines 1999 model ( 2 M type... Year(s) : 1998, 1999, 2000 Location : MIDDLE EAST
84 position Double oven and automatic doffing for polyester yarns of the whole range of textile counts, 84 p... Year(s) : 2002 Location : EUROPE (Western and Northern)
2 x DTY RIETER Machines Double sides working separately 160 spindles each machine. Year(s) : 2001 Location : EUROPE (Western and Northern)
Working, periodically maintained 1998 model 120 position Aiki AT 501 air texturizing machine. Year(s) : 1998 Location : MIDDLE EAST
240 spindle Single roller Single yarn path With air jet No online tension device Machine Stop on mill floor Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)
1995 year (2018 reconditioned) Model AFK-V-HTI (designed for higher speed with lower electrical cost)... Year(s) : 1995 Location : AMERICA North (USA-Canada-Mexico)
168 positions SDX4 friction texturing machine, with special "V" configuration suitable for processing fine co... Year(s) : 1999 Location : EUROPE (Western and Northern)
168 position 1500 mt high speed texturing machine. type TMA for PES and PAM yarns (from 10 to 330 Dtex) Mach... Year(s) : 2002 Location : EUROPE (Western and Northern)
240 spindles with unitens airjets,PU discs auto doffing, double friction(S+Z). very good condition still work... Year(s) : 2011 Location : ASIA (China - Taiwan - HKG)
ICBT 1998 FT15-E2HTADX2 False Twist Texturing Machine 96 spindles per side 48 take ups per side, Runs thru air... Year(s) : 1997, 1998 Location : AMERICA North (USA-Canada-Mexico)
You can find used Texturizing machines on Wotol
Texturing process will changes the physical form of a fibre in order to give a different texture and sense of touch, comfort, appearence. It consists in the formation of crimp, loops, coils, or crinkles in filaments. The filament will be distorted then heated ad cooled down.
During texturing the yarn can go through a knife edge that will heat and stretch the yarn, stuffer box or owen box where the filaments are heated where they enter at higher speed than their exraction, air jet that will also overfeed the filament into the chamber at high speed, also the filament will pass through friction disks.
Questions and answer corner from users
Q: I want to ship 4 sets of Barmag AFK texturizing machines from 2003. How many containers do I need? Machines have 240 spindles. How do you load the electric cabinet which is higher than a container?
A: For each Barmag AFK texturizing machine with 240 spindles you will need minimum three 40FT high cube containers. Ideally 4 containers would be better but due to container costs it is possible to save one container. THe electric cabinet can not be loaded in its vertical position. So we have to lay it down on a special palette we will make. We have done it many times and we never has any problems.
Q: What is the benefit of a Barmag MPS texturizing machine compared to other texturzing machines?
A: Barmag Multi-Purpose- Superflex™ (MPS) texturizing machine can run different project even different polymer in every section. That gives more flexibility and freedom for producers.Besides its flexibilty it is an energy saving machine. THere are other benefits such as:
- the autodoff with segregated areas for POY, DTY
- automated string-up unit from godet through the second heater into the W4 take-up will alanble 20% enery saving
- Take-up Technology (ATT) that enables higher flexibility to all yarn types.
- Each compartment within the MPS can be have its own settings.
Barmag stopped to produce MPS machines as very high Production cost.