Menu

Dominion BM Mortiser

Ref : 2339965-15-MT
Condition : Used
Manufacturer : Dominion
Model : BM
Short Description : Mortiser
Year(s) : -
Quantity : 1
Location : Seller or machines location:
EUROPE (Western and Northern)
Last check : 19 Jul. 2022

Here is Dominions version of a Wadkin DM mortiser
Dominion BM Mortiser head consists of a built in 1.5Kw (2Hp) motor which gives direct drive to the chisel unit.
The head is mounted on precision machined v shaped slide ways with spindle bearings running in dust proof enclosures.
The chisel holder bracket ensures perfect alignment in relation to the table below.
The head will accept chisels up to 25mm (1″) which hold in place by a split cast iron locking device.
An adjustable depth stop regulates the depth of mortise. The hand lever is adjustable in both length and angle, thus providing comfort for the operator.
The table moves on machined slides resulting in a smooth and accurate movement.
Left to right movement is by a large hand wheel through rack and pinion gearing.
Front to back movement is through a separate smaller hand wheel using a screw thread with readout
The work table is a precision machined casting mounted on the main frame. Complete with setting out stops
Using the table rear support, the timber locates square to the chisel. A strong designed cramp attached to the table holds the work in place whilst mortising.
Hand operated quick acting lead screw, forces the timber down and back against the rear support.
A pre-drilled clamp plate allows you to fix a wooden pad to prevent marking of the workpiece.
Condition Used
Table Size 560mm X 150mm
Clamping Manual
Motor Size 2hp

Other machines similar to Dominion BM Mortiser

1
Location : EUROPE (Western and Northern)
Year(s) : 1998
1
Location : EUROPE (Western and Northern)
Year(s) : 2007
1
Location : EUROPE (Western and Northern)
Year(s) : 1995
1
Location : EUROPE (Western and Northern)
Year(s) : 2010