FATA PRODUCTION MACHINERY Type ZincAlum Line CONTINUOUS ZINC/ALUMINUM COATING LINE FATA PRODUCTION MACHINERY

FATA PRODUCTION MACHINERY
Type
ZincAlum Line
Year
1990
Capacity
110.000 MT per year



Main Equipment:
2 Uncoilers
Entry lap welder (Taylor Winfield)
6 Strands Horizontal Entry Accumulator
Horizontal Annealing Furnace (Non Ox Heating Section – Radiant Tube

Soaking Section: 1 Jet Cooling –Sow Down Cooling Section, Down
Chute with electrical heaters

AJAX Pre-melt Pot (7 MT) – heated by Two 300 KW channel type

inductors
AJAX Coating Pot (60 MT) - heated by Four 300 KW channel type

inductors. 3roll type Rig. KHOLER Air knives
Coating thickness measuring (DMC)
6 Hi Leveller
Chemical treatment (Inmersion Tank)
Oiler
Flying Shear
2 Tension Reels with edge control

Strip width range 610 – 1220 mm
Strip thickness range 0.30 – 0.85 mm
Coil weight entry zone Max 18 MT
Coil weight delivery zone Max 9 MT
Maximum speed 120 m/min
ZNAL coating weight 150 g/m2 (both sides)
Production Capacity 110.000 MT per year
Crew 6 Operators + overhead crane operator