Menu

Kentwood M509

Ref : 2409950-15-MT
Condition : Used
Manufacturer : Kentwood
Model : M509
Year(s) : -
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

The Kentwood M509 5 Head through feed Moulder’s heavy cast iron construction, tight tolerance spindle assemblies, rugged feed works, heavy duty gear boxes, hardened chromed bed ways, and high level of quality make it a Best in Value.
Combine that with quality Service and Support, Stiles Machinery offers a Best in Class Solution in today’s market place.

Technical Specifications
machine capacity (finished) 125 mm x 230 mm (4.92” X 9”)
min working width 15 mm (.59”)
max working width 240 mm (9.44”)
min working height 10 mm (.39”)
max working height 135 mm (5.31”)
min working length-end to end feed* 10”
min working length-individual part 31 ½”
spindle RPM 6000 rpm
spindle diameter 40 mm
cutting circle of 1st head 160 mm (6.29”)
cutting circle of 2nd head 200 mm (7.87”)
cutting circle of 3rd head 200 mm (7.87”)
cutting circle of 4th head 200 mm (7.87”)
cutting circle of 5th head 200 mm (7.87”)
feed motor 5 HP
feed speed 6-24 m/min (20-78’/ min)
1st bottom spindle motor 10 HP
2nd right spindle motor 7.5 HP
3rd left spindle motor 7.5 HP
4th top spindle motor 15 HP
5th bottom spindle motor 10 HP
axial adjustment of straightening spindle 5 mm (.19”)
axial adjustment of vertical spindles 40 mm (1.57”)
axial adjustment of horizontal spindles 40 mm (1.57”)
driven rollers (7) 140 mm diameter
driven bed rollers 2
lifting motor for feed beam 1 HP
machine weight 7,937 lbs
Utility Requirements
Electrical
operating voltage 460 VAC
amperage service 60 amps
control voltage 110 VAC
Compressed Air
connection size 3/8”
pressure required 6 bar
Dust Collection
total CFM required 4,500 CFM
number and diameter of ports (5) @ 5” diameter
air velocity required 5,500 FPM

Machine Base Construction:
 machine base is made of cast iron which is superior to welded tubular steel bases in that it provides a rigid foundation that reduces vibration
Infeed Table and Machine Bed
 hardened chromed table (0.3mm/ .012”)
 two (2) meter infeed table ergonomically placed single levers for fence and bed positioning with
10mm adjustment indexable and adjustable bed plates via machined dovetail ways.

Feeding System
 heavy duty feed beam supported by two 24 mm ACME screws for positioning
 Cardan Drive System
 heavy duty gear boxes and universal shafts
 three (3) stage pneumatic pressure stations independently controlled via regulators and gauges
 seven (7) 140 mm upper feed rollers
 adjustable shaft mounted serrated pressure rollers
 serrated pressure rollers opposite near (left) vertical spindle adjusted via spacers
 power feeding device for short pieces* o will feed 10” long parts end to end and (31.5”) parts individually
 two (2) powered lower bed rollers

Pressure Shoes and Chip Breakers
 receding segmented chip breaker
 spring loaded pressure shoe after top head
 mechanical digital readouts for adjustments of chip breaker and pressure shoe

Other machines similar to Kentwood M509

1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2008
1
Location : AMERICA North (USA-Canada-Mexico)
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2007
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2013