Landis 1R

Nominal Swing Over Table: 10"
Maximum Swing Over Table: 10-7/8"
Nominal Distance Between Centers: 20"
Hydraulic Table Traverse: 2" – 240" IPM
Traverse per Turn of Handwheel: 0.200"
Traverse Handwheel Gradations: 0.001"
Swivel Table Graduated: 20°, 4" per Foot
Wheelhead Swivel Left & Right of Center: 90°
Wheel Size: 12" Diameter
Maximum Width, Full Wheel: 3"
Maximum Hydraulic Infeed on Diameter: 0.090"
Rapid Infeed Stroke: 1"
Minimum Feed Gradations on Diameter: 0.000050"
Work Diameter Reduction per Revolution of Handwheel: 0.100"
Work Diameter Reduction per Revolution of Fine Feed Knob: 0.001"
Wheelhead Motor: 3 HP
Workhead Swivel Toward Wheelhead: 90°
Workhead Swivel Away from Wheelhead: 30°
Workhead Spindle Speeds: 60 – 600 RPM
Workhead Spindle Nose: A2-5"
Workhead Motor: 1/4 HP
Approximate Weight: 4,150 lbs
Approximate Dimensions: 8'L x 4'W x 6'6"H
Hydraulic Table Traverse
Auto Infeed at Table Reversals
Auto Plunge Feed
Power Rapid Wheelhead Advance & Retraction
Sparkout Timer
Dual Live/Dead Workhead Spindle
Hard Film Microsphere Wheel Spindle Bearings
Automatic Lubrication for Carriage and Wheelhead Ways
Electrics: 3/60/230-460 Volt Motors
Swing Down I.D. Grinding Attachment
I.D. Grinding Spindle
Face Plate
Dresser
Coolant System in the Base
Machine Wired for 460 Volts