Mazak MAZATROL FUSION 640T Control 4000 RPM/1 Multiplex 6300Y 4 Axis

Mazak Multiplex 6300Y
2009

Maximum Swing…………………………………… 16.93″
Standard Cutting Diameter……………………… 13.0″
Maximum Cutting Diameter……………………… 16.93″
Maximum Cutting Length Chuckwork…………… 8.86″
Maximum Cutting Length Shaftwork……………. 25.59″
MAIN SPINDLE (L&R)
Distance Between Spindle Faces:
Max.(Both Heads @ Home Position)……… 57.09″
Min…………………………………………….. 9.82″
Spindle Nose………………………………………. A2-8
Spindle Bore……………………………………….. 3.46″
Maximum Bar Diameter…………………………… 3.0″
Spindle Speed/Ranges……………………………. 4,000 RPM/1
Spindle Indexing (C-Axis)………………………… .001 deg./360,000 Positions
Spindle Horsepower (30 min.)…………………… 30 HP (AC)
Spindle Torque…………………………………….. 441.34 ft.-lbs.
TURRET (L&R)
Type of Turrets…………………………………….. Dodecagonal/Drum Non-Lift
Tool Holder Shanks……………………………….. Modified VDI
Turret Index Time (1 Step)………………………. 0.3 Sec.
Total Number of Tools:
(Rotary Avail./All Positions)………………… 24 (12×2)
Tool Size:
Turning & Facing……………………………….. 1″ x 1″
Boring Bar Maximum Diameter………………. 2″
MILL SPINDLE (L&R)
Spindle Speed……………………………………….. 4,000 RPM
Spindle Horsepower (10 Min)……………………… 10 HP (A.C.)
AXIS
Travel:
Y-Axis (L&R)……………………………………. +/- 3.0″
X-Axis (L&R)……………………………………. 12.2″
Z-Axis (L&R)……………………………………. 23.82″
Rapid Traverse:
Y-Axis………………………………………….. 393 IPM
X-Axis………………………………………….. 945 IPM
Z-Axis………………………………………….. 945 IPM
C-Axis………………………………………….. 400 RPM
MACHINE
Machine Floor Space (W x L):
W/O Automation or Bar Feeder, etc………. 95.3″ x 167.7″
Machine Height…………………………………….. 85.44″
Total Power Required (Machine Only)………….. 76 KVA
NOTE: Actual Machine Main Transformer KVA Rating Will be Greater
Air Requirements………………………………….. 71 psi / 14 CFM
Total Weight (For Machine Only)……………….. 26,400 lbs.
Equipped With (subject to buyer verification):
MAZATROL FUSION 640T Control
N-EIA/ISO Option Package
PCMCIA Interface (2-Slot, Card Buts)
3.5” FDD Unit
Network Interface (For LAN & Modem)
High Power Coolant 105 PSI / 10.5 GPM
C-Axis 0.001 Degree Incr. L&R
Y-Axis Control
Automatic Tool Eye L&R
Milling Spindle Synchronous Tapping L&R
Overload Detector L&R
Exit Conveyor
Work Unloader
Chuck Air Blast L&R
Turret Air Blast L&R
Chip Conveyor Rear Disposal Hinge Type
Auto Pecking Cycle with Load Detection
Parts Work Ejector and Basket for Rt Spindle
Barfeed Interface only
10” 3-Jaw Hyd Chucks L&R