Pama SPEEDRAM 2 Variable

Ref : 2277202-3-AW
Condition : Used
Manufacturer : Pama
Model : SPEEDRAM 2
Spindle Size : -
Spindle Speed : Variable
Year(s) : 2002
Quantity : 1
Location : Seller or machines location:
EUROPE (Western and Northern)

Year of construction: 2002
Control: SINUMERIK 840 C

X-axis, lateral movement upright 11,000 mm
Y-axis, vertical movement drilling unit 2,800 mm
Z-axis, longitudinal movement support sleeve 900 mm
W-axis, longitudinal movement drilling spindle 800 mm
Drilling and milling unit:
in hydrostatic design
Cross section support sleeve 360 ​​x 400 mm
Movement support sleeve (Z-axis) 900 mm
Spindle diameter 150 mm
Movement spindle (W-axis) 800 mm
Lowest position of the spindle above the table surface 0 mm
Spindle cone (short taper according to DIN 69871) ISO 50
Spindle power S1 (100%) 60 kW
max.torque on the spindle 2,900 Nm at 195 rpm
Spindle speed range 6-3,000 rpm, 2 gear stages
max.feed 15,000 mm / min
Plate fields: 2 pieces
Area of ​​the panel fields 4,000 x 2,500 mm, thickness 300 mm
max.workpiece weight 15,000 kg / m2
Feeds, rapid traverses:
max.feed X-axis 20,000 mm / min
max.feed force for X and Y axes 30,000 N
max.feed Y- and Z-axis 15,000 mm / min
max.feed force for X and Z axes 25,000 N
Rapid traverse X-axis 20,000 mm / min
Rapid traverse Y and Z axes 15,000 mm / min
Construction features:
X axis
Guide system of the column carriage in hydrostatic, wear-free design.
Drive system with servo motor and duplex pinion. The pinions are hydraulically preloaded
for an axial backlash-free drive.
Drilling unit
The support sleeve is made of Meehanite cast and held in a rectangular shape.
It slides on hydrostatic bearings that are incorporated directly into the head unit.
The drilling quill runs inside the RAM - axially on bronze bearings.
It is supported by high-precision front and rear angular contact ball bearings.
Tool magazine:
Chain magazine type
Number of seats 90
Electrical connection:
Operating voltage 3-400 / 230 V
Frequency 50 Hz
Total connection line 195 kVA
Power requirement 125 kW
Required space 16 x 7.7 x 5.5 m
Machine weight approx. 50 t

Renishaw MP7 3D touch probe
Chip conveyor between plate field and X-bed
Vertically movable operator platform (together with drilling unit)
Tool magazine with manipulator, 90 positions
Tool breakage and wear monitoring (ARTIS)
Movable pick-up station 1 + 1 for high speed head
High-speed head MG4, SK50, 13kW, i = 1: 4, M_max = 405Nm, U_max = 8,000 rpm
2 piece plate fields 4,000 x 2,500 x 300 mm

Other machines similar to Pama SPEEDRAM 2 Variable

Location : EUROPE (Western and Northern)
Year(s) : 2002
Location : United States (USA)
Year(s) : 2009
Location : EUROPE (Western and Northern)
Location : EUROPE (Western and Northern)
Year(s) : 1971