Used Screw Extruders

4.5" Davis Standard Single Screw Ram Stuffing Extruder 34:1 L/D Vented Water Cooled Barrel Pneumatic Ram Stuff Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Gear pump ZP 90/63 for extruder size 120 SEW spur gear: R 137 Siemens DC motor: 1 GG5 134 Drive power: 19.8 kW Location : EUROPE (Western and Northern)

Price : On request

Rubber extruder Screw diameter: 60 mm Screw length: 11D Screw length: approx. 660 mm Auger and cylinder overh Location : EUROPE (Western and Northern)

Price : On request

For PE PP masterbatch co-rotating screws 2 x 40 mm. 37 L/D in very good conditions a.c.Siemens 51 kw motor wit Year(s) : 2004 Location : EUROPE (Western and Northern)

Price : On request

4 in. stainless steel extruder. 14 in. barrel length. Approx. 5 in. wide x 5 in. long feed section with stai Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6.5" Davis Standard Single Screw Extruder 42:1 L/D Air Cooled Vented Barrel Vent Location 191" Total Barrel 27 Year(s) : 1989 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

USED 410 KW d.c.MOTOR SICEMOTORI Complete with starter + transformer for inductance RECONDITIONED Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

Cutting Chamber (Cutter) 50 W x 120 D (mm) Horsepower 2 HP AC Motor Bed Knife 50 mm Wide Speed Range 80-10 Year(s) : 2016 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5" American Kuhne 30:1 L/D lowboy extruder Has electrically heated and air cooled barrel Driven by a 125 HP Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.5" 24/1 Killion Extruder Includes (3) control panels Zenith melt pump with 2 hp motor Strand die 6" wide f Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Electrically heated water cooled (closed loop) and vented barrel at an approximate 69″ center line height. Ce Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Type ERMAFA 2x90-22D Capacity Profile 185- 230kg Capacity Pipe 280 - 350kg Motor Power 52,5 Kw DC Resistance P Location : MIDDLE EAST

Price : On request

Brand SARAÇ Location : MIDDLE EAST

Price : On request

COMAP Tip 35/20 D PVC Capacity 35 Kg Motor Power 5 Kw DC Resistance Force 3 Kw Vida Print Ø 35 Location : MIDDLE EAST

Price : On request

Condition: used, will be overhauled in relation to the order including guarantee, including CE marking Specif Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

Plastic granulation system extruder HKS 180-120 With side dosing Make Sikoplast Overhauled 2015 Use: Wetting Year(s) : 2015 Location : EUROPE (Western and Northern)

Price : On request

Ran as part of a Co-Extruder Included Gear Box, Motor, Screw, Heaters Controls No Controls Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Hours 65,000 Screw Diameter 80 mm Control Panel PLC 6016-MX Voltage 460 Vac Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

30:1 L/D air cooled non-vented barrel at a 23.5″ centerline Powered by a 40 HP 230/460-volt A/C motor with Tec Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.0" Killion Extruder 24:1 L/D Ratio 15:1 Gearbox Ratio, Perfection Gear Gearbox, Rated To 3.10 HP 116 RPM Max Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Size 2.5" L/D Ratio 24:1 Horsepower 40 HP Cooling Water Cooled Motor DC Drive DC Belt Belt Driven Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Diameter 3.5" L/D Ratio 30:1 Feed Opening 3" Barrel 103" Water Cooled Die Head Film Motor 125 HP B Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Drive: 5-50 kw Motor speed: 255-2550 U/min Step-down gear: 1 :67,9 Screws Diameter: 90mm Lenght: 20; 23 L/D Location : EUROPE (Western and Northern)

Price : On request