Used Screw Extruders
982 resultsSubcategories
3.5″30:1 HPM extruder having an electrically heated water cooled (closed loop) vented and plugged barrel at a Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details25D with 25hp motor 7 zone control panel Location : EUROPE (Western and Northern)
Price : On request
More details120mm OMV extruder, 36d vented, 156 kW DC Drive, electrically heated water cooled barrel. Gearbox oil pump an Location : EUROPE (Western and Northern)
Price : On request
More detailsStainless steel construction. 12 in. dia. x 5 ft. 6 in. long screws. Jacketed mixing section measures approx Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsHorizontal Twin Shaft co-rotating and closed type continuous Kneading Processor Approx. 4 in. (100 mm dia.) p Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details3.5″ Readco twin screw continuous processor heavy duty design stainless steel product contact surfaces jackete Year(s) : 1987 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details1.75" Merritt Davis Extruder 24:1 L/D AC Motor Control Panel Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsPRODUCTION LINE Year(s) : 2003 Location : EUROPE (Western and Northern)
Price : On request
More detailsParker 590+ DC Drive to suit 200kW motor, 470A 6 x Heat cool zones for temperature control for barrel 4 x Heat Year(s) : 2018 Location : OCEANIA
Price : On request
More detailsAustralian Made Telford Smith Extruder with control panel 120mm Screw Diameter 24:1 LD Ratio 200kW Main motor Location : OCEANIA
Price : On request
More detailsReliance 180kW x 1,750 rpm DC motor Xaloy bimetallic barrel Water cooled barrel Beringer SL45 hydraulic slide Year(s) : 1987 Location : OCEANIA
Price : On request
More detailsUsed 3.5" Prodex Extruder 24:1 L/D Ratio 29.51:1 Lufkin/Prodex Gearbox 5 Barrel Zones Air-Cooled Barrel 42" Ce Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details30:1 L/D Ratio, 30:1 L/D Special Screw for MuCell Material Side Port Feed Throat for MuCell Material Entry Wat Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsOne (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is el Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsSize 6 L/D 30:1 Type Extruders - Single Screw Year(s) : 1986 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsExtruder 2.5", 24:1 Water Cooled Motor and Drive: Rebuilt Safetronics 40 HP DC Gear ratio 15:1 Heat zones 4 ba Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsExtruder 2.5", 30:1 Wat Cooled Motor and Drive: 50 HP Reliance DC Gear ratio 16.95:1 Heat zones 4 barrel/1 gat Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUsed Davis Standard 6" 150mm Cold Feed Rubber Extruder 20:1 L/D gearbox rated at 300 HP gear driven power fee Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsType: ED.N90.30D Range : screw ø 90-30D approx. 300 kg / h Drive: DC motor 94.0 kW Year(s) : 1994 Location : EUROPE (Western and Northern)
Price : On request
More detailsType: KME 1-60-30B Range : screw ø 60-30D approx. 300 kg / h Drive: DC motor 100 kW Execution as co-extruder m Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More detailsTwin screw extruder Type: BT 550 Note: approx. 180 kg / h Year(s) : 1991 Location : EUROPE (Western and Northern)
Price : On request
More detailsTwin screw extruder Type: BT 400 Note: approx. 100 kg / h Year(s) : 1995 Location : EUROPE (Western and Northern)
Price : On request
More details6″ NRM Plastics Extruder Rebuilt approximately 43″ centerline height gearbox having new bearing (less thrust) Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details30mm 20D with 3kw dc motor Model MEB 30-20D Max screw speed 64rpm 4 zone control panel Location : EUROPE (Central and Eastern)
Price : On request
More detailsWe have two 1″ Akron Extruders – being rebuilt – Photos shown during process Rebuilt Gearbox new bearings and Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsYou can find used Screw Extruders on Wotol
For second hand Screw Extruders we have Single Screw Extruders, Twin Screw Extruders, Screw Extruder Line, Auxiliaries/Equipment for Extruders. The main manufacturers for used Screw Extruders are Davis Standard, NRM, Battenfeld, Barmag, Weber, Krauss Maffei, Sterling, Berstorff, Cincinnati, Royle, Bandera, Reifenhauser, Bausano, Nokia, American Kuhne .
The main models are KME 90-30, 350 R2, T600-90G-S15, KMD Series, 45IN45H, PROTON 75.
.