Used Screw Extruders

Main extruder EOM 90 Screw diameter 90 mm Ration 1:35 Max. screw rotation 129' Temp controlled zones 7 Heating Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

3.5" Sterling 24 L/D single screw extruder. Has electrically heated air cooled barrel With 54" center line h Year(s) : 1980 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6" Rubber Extruder, 11: 1 L/D Model 600SR F6258, Cast Aluminum jacketed water cooled heaters 2 Zones New Heat Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3 1/2" Rubber Extruder 20:1 L/D, Thermatic II Model: 350SII- F7554 Electrically heated, 4 zones water cooled b Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Profil Extruder Screw size mm : 60 ELK 60-28D 57 KW Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

Model Thermatic 150 1.5″ extruder 34:1 L/D barrel having a five (5) zone electrically heated Air cooled, and n Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Drive motor: 180 KW Throughput: 800-1000 kg per hour For plasticizing any shredded plastic waste. Finally, s Location : EUROPE (Western and Northern)

Price : On request

Motor 300 HP DC Motor Drive Reliance Flex Pack Drive L/D Ratio 30:1 Screw 4.5” 2-Stage Screw Barrel 4.5” Location : AMERICA North (USA-Canada-Mexico)

Price : On request

L/D Ratio 38:1 Motor 325 HP DC Screw RPM 500 Motor RPM 1750 Gearbox Ratio 3.5 Voltage 460 Volt 3 Phase 60 Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

L/D Ratio 30:1 Screw 2.5" Barrel 2.5" Type/Style Low Boy Extruder Vent/Vents Plugged Non-Vented Cooling Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2 water stop machines with more than 30 moulds and 2 mixers. the machines are in our factory located in Ankar Location : MIDDLE EAST

Price : On request

Gearbox/thrust section low hours Electrical heating Air cooling 5 zones Motor: Not available, suited to 185kW Location : OCEANIA

Price : On request

L/D Ratio 34:1 Vented Yes Heat Electrically Heated Barrel Water Cooled that is 12' Long and 8" Round Screw Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Motor HP 250 L/D Ratio 30:1 Screw Diameter 4.5" Gearbox Ratio 14.0:1 Screw RPM 155 Voltage 480 Volt, 3 P Location : AMERICA North (USA-Canada-Mexico)

Price : On request

used 3.5″ 30:1 L/D Welex Model 350-2-1984-RHNV extruder having an electrically heated water cooled (closed lo Year(s) : 1984 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw Diameter 6" Screw Length 160" Clamping Yes Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.5″30:1 HPM extruder having an electrically heated water cooled (closed loop) vented and plugged barrel at a Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Stainless steel construction. 12 in. dia. x 5 ft. 6 in. long screws. Jacketed mixing section measures approx Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Horizontal Twin Shaft co-rotating and closed type continuous Kneading Processor Approx. 4 in. (100 mm dia.) p Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.5″ Readco twin screw continuous processor heavy duty design stainless steel product contact surfaces jackete Year(s) : 1987 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Parker 590+ DC Drive to suit 200kW motor, 470A 6 x Heat cool zones for temperature control for barrel 4 x Heat Year(s) : 2018 Location : OCEANIA

Price : On request