Used Screw Extruders

Single-screw extruder 60 mm Ø 15 L/D Reducer engine: 10 hp Location : EUROPE (Western and Northern)

Price : On request

Single-screw extruder : 60 mm Ø 25 L/D Motor: 15 hp 6-speed gearbox with electrical panel Location : EUROPE (Western and Northern)

Price : On request

Single-screw extruder 120 Ø 35 L/D Engine: 110 Kw (150 hp) Filter changer: 220 mm 4.2m long With degasser Wat Location : EUROPE (Western and Northern)

Price : On request

Single-screw extruder Stainless steel bath: 3 m Filter changer: 160 mm Electrical panel Wire head for pelletiz Location : EUROPE (Western and Northern)

Price : On request

Twin screw extruder : 50 Ø 12 L / D Motor: 4.5 kw Without electrical panel Location : EUROPE (Western and Northern)

Price : On request

Screw ø 60-30D ca. 250 kg/h Drive:D.C. Motor 98,0 kW Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

Range: Screw ø 30-25D, approx. 15 kg/h Drive: D.C. drive 8,0 kW Remarks: 2022 new screw and barrel original We Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

Screw ø 70-25D Approx. 100 kg/h Drive:45,5 kW D.C. motor New electrics, new touch panel Year(s) : 1987 Location : EUROPE (Western and Northern)

Price : On request

2.5″ 24:1 extruder having an electrically heated, air cooled, and non-vented barrel at approximately a 65″ c Year(s) : 1995 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

30:1 L/D electrically heated water cooled 6 zone vented barrel with screw and clamp. No motor. 42″ center l Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- an Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5″ 32:1 extruder having an electrically heated, air cooled, and non-vented barrel at approximately a 65″ c Location : AMERICA North (USA-Canada-Mexico)

Price : On request

27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, n Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

30:1 L/D air cooled non-vented barrel at a 23.5″ centerline Powered by a 40 HP 230/460-volt A/C motor with Tec Location : AMERICA North (USA-Canada-Mexico)

Price : On request

32:1 L/D With an electrically heated Water cooled (closed loop) vented Plugged barrel at approximately a 72″ Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5″ extruder, 32:1 L/D five (5) zone air cooled and vented barrel at a 45″ centerline height. Top center feed Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model Thermatic 150 1.5″ extruder 34:1 L/D barrel having a five (5) zone electrically heated Air cooled, and n Location : AMERICA North (USA-Canada-Mexico)

Price : On request

In good working condition, with an capacity output of up to 2200 kg/h, depending on material formulation. Th Location : EUROPE (Western and Northern)

Price : On request

With an output capacity of up to 2200 kg/h, depending on material formulation. This COMAC extruder has a scr Location : EUROPE (Western and Northern)

Price : On request

JOHNSON 1.5″ 24:1 L/D, NON-VENTED BARREL MOUNTED ON BASE FOR CO-EXTRUSION 10 HP DC MOTOR/NO CONTROLS INTO 11. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

JOHNSON 1.5 24:1 L/D, NON-VENTED BARREL MOUNTED ON BASE FOR CO-EXTRUSION 10 HP DC MOTOR, 11.32:1 GEAR RATIO G Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Type: Main product of this machine is melt blown PP used for medical masks Extruders: SJ65/30 Single Screw Ext Location : EUROPE (Western and Northern)

Price : On request

Small batch production with Monobloc extruder. Good working condition. Type: Locati Pavesi Monobloc Materials Location : EUROPE (Western and Northern)

Price : On request

Processed materials: LDPE, MDPE, LLDPE, MLLDPE Extruder fi 120 mm L / D 30, installed on the line for the prod Location : EUROPE (Western and Northern)

Price : On request

24:1 L/D AIR COOLED ELECTRICALLY HEATED BARREL WITH A 42″ TO 44 3/4″ ADJUSTABLE CENTERLINE, DRIVEN BY A 10 HP Location : AMERICA North (USA-Canada-Mexico)

Price : On request