Used Semiconductor and PCB Manufacturing
9,133 resultsFind by category
Small Footprint Min/Max Board Size: 2 x 2.4 to 10 x 13 in PCB Clearance: Top: 40 mm, 1.57 in., Bottom: 40 mm, Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsSingle side inspection, 18 micro meter resolution Can be reconfigured for conformal coating inspection. Board Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsHawkEye 750 2D Inspection Adjustable Stencil Shelf Max Stencil 29” x 29” Under Stencil Wipe, Dry/Wet/Vacuum (4 Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsTouch screen control panel Redundant over-temp and liquid low level safety protection Digital temperature cont Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsTop Load 29" x 29" Stencil Capacity Microscopic, ultrasonic removal of solder paste, post solder flux build-up Year(s) : 2019 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsVery Good Condition In production through August 2019 Chemical Isolation Pre-wash: 2 upper and 2 lower spray b Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsMaintenance free Tube Sealed reflection target 130 Kv 5 micron spot size 39-watt max. output CAD Input: Pick a Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsLead Free OPTI II Spray Fluxer 26" Process Width 2 - Top Side Preheats 3 - Bottom Side Preheats Nitrogen Capab Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details118″ x 46″ Footprint Dimension Internal Spray Fluxer Forced Air Convection Preheater Dual Wave with Titanium N Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBuilt-in Display Screen Easy-use touch pad Temp Control Tank Heater 208V, single phase Stencils Size: Up to 2 Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsCurrently set up for stencils, baskets are needed for batch process Built-in Display Screen Easy-use touch pad Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details160kV Open Tube (Filaments) Nano Focus X-Ray Tube 1200X Geometric Magnification Imaging System: Quality Assist Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details2D Inspection Left to Right Process Flow Max Board: 23" x 20" Single Track Single Camera with 8100 cognex visi Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsFreezer 13 Cu Ft Refrigerant R404A Stainless Steel Shelving Hermetic Compressor for Low Temperature Applicatio Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsSemi-Automatic Insertion Machine Included: CS-740B Delivery System Parts: radial, axial, and multi-leaded Arm Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsEdgeLoc Snugger System Advanced Post Print Inspection Package Contrast Based 2D Inspection (paste on pad) & Br Year(s) : 2010 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsQuik-Tool Support Tooling Stencil: 29" x 29" Max Board: 460mm x 460mm Left to Right Process Flow Monitor, Keyb Year(s) : 2006 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsLead Free Edge Rail Mesh Belt Polar Cooling Air Machine, N2 Capable Flux Flow ControlTM (Flux Evacuation Syst Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsCombo Conveyor (Edge Rail & Mesh Belt) Left to Right Process Flow Auto Chain Oiler 18" Process Width Lead Free Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsLead Free Left to Right Process Flow Dual Lane or Single Lane 10 Heating Zones 3 Cooling Zones Edge Rails Only Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsLead Free Capable 8 Heating Zones 2 Cooling Zones Left to Right Process Flow CBS - Center Board Support Progra Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details6 Heated Zones Left to Right Flow Edge Rail Mesh Belt Programmable Width Adjust Fine Mesh Belt Smart Tracker S Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsLeft to Right Mesh Belt Edge Rail Programmable Width Adjust Smart Tracker SMEMA Light Tower Blower Monitoring Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details7 Heating Zones - Top & Bottom Lead Free Capable 350C Max PCB: 22" wide Left to Right Process Flow Edge Rail M Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details7 Heating Zones 3 Cooling Zones Edge Rail Mesh Belt Air Machine Lead Free Capable 20" Process Width Left to Ri Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUsed Semiconductor and PCB Manufacturing for sale
You will find machines for the manufacturing of the electronic chips and their assembly on printed circuit boards (PCB).
Semiconductors market have exceeded 500 billion usd in 2019. It covers memory devices, logic devices, analog IC, MPU, power devices, MCU, sensors, that will be used in an increasing number of applications such as computers, mobile phones, all electronic appliances, electronic in aotomotive industry, machinery and many more.
Once the semiconductors are manufactured they are assembled on the PCBs and main machines needed for this purpose are pick and place machines, sodering owen, secreen printing machines for solder paste, dispensers for glues.
This industry is largely located in Asia and expecially in China.
The main manufacturers machine are Mydata, Universal, Juki, Panasonic, Fuji, Samsung, Manncorp, Siemens, ASM, Quad, Assembleon, Universal Instruments, Europlacer, Philips, Advantest, AG Associates, Agilent, AMAT, Anritsu, Applied Materials, Aqueous Technologies, ASM, Asymtek, ASYSBausch & Lomb, Blue M, Branson, Branson / IPC, BTU, Camalot, Canon, CTI,Dage, DEK, Despatch, Disco, DNS, DynaPace, Ebara, Edwards, Ekra, Electro Design, Electroglas, Electrovert, Ersa, Esec, EVG, Gasonics, Heller, Hewlett Packard (HP), Hitachi, Jot, K & S, Kanetic, Karl Suss, Keithley, Keysight, KLA-Tencor, LAM, Leica, Leybold, Lynx, Mania, Matheson, Mirtec, MPM, Nanometrics, Nikon, NuTek, Olympus, Oxford, Plasmatherm, Rohde & Schwarz, Rudolph, Schmid, Seho, Semitool, Simplimatic, SMT, Speedline, Suss, Technics, Tegal, Tektronix, TEL, Tencor, Tenney, Teradyne, Thermotron, Tokyo Semitsu Kogaku (TSK), Varian, Veeco, Venntek, Verteq, Vitronics, Vitronics Soltec, VWR, West Bond, YESTech, Yield Engineering Systems (YES)
The main model my12, TX2i SIPLACE, Mydata My200SX-14, KE-2050L, MY9, GSM2 4681A, Topax XII, CP40V, 730L, TX2i, SL940E, XP243E, 4982, MY15, MC389CY-F3-V, Siplace CA4, YG100-RB, MY100SXe-14