Battenfeld, Wittmann MacroPower E 450/2100+ UNILOG B6P (SERVO) 450 T
EUROPE (Central and Eastern)
Control: UNILOG B6
Technical Data Injection Unit
Screw diameter = 65 mm
Screw L/D ratio = 22
Specific injection pressure = 1959 bar
Calculated stroke volume = 1062 cm3
Max. injection weight (PS) = 966.4 g
Technical Data Clamping Unit
Clamping force = 4500 kN
Clear distance between tie bars = 900x750 mm X mm (VxH)
Min. mold installation height = 330 mm
Max. mold installation height = 780 mm
Max. distance between plates = 1380 mm
Opening stroke = 1050 mm
ServoElectric injection unit
Servo Packaet S0
ServoPower package S1
(hydraulic pump speed control for increased energy efficiency),
integrated filter unit
Injection unit: servo electric (Knodler) with
jet actuator, injection speed 400 mm/s
(servo injection control significantly reduces electricity
costs and supports precise regulation injection process)
Electric ejector with a force of 60 KN and a path of 180mm
Additional equipment:
1. Air valve
2. Cooling water flow regulator
3. Digital interface for the temperature regulator
(possibility of controlling six thermoregulators simultaneously)
4. Interface for controlling the needle cutting off
the nozzle in the tool
5. Interface for controlling the external hot runner regulator
6. Full integration for the Wittmann W8xx series robot
7. Button for quality control
Possible to buy with Wittmann Linear robot ,
temperation units, conveyor, external heating zones etc,
check our website for all information.
Robot Wittmann
X=1100mm
Y=1400mm
Z= 3000 mm
Year :2013