Menu

Haas TM-2P 3 Axis

Ref : 2676595-3-MT
Condition : Used
Manufacturer : Haas
Model : TM-2P
Nb Of Axis : 3 Axis
Year(s) : 2011
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

HAAS TM-2P
Year 2011

X-Axis Travel 40.0 inches
Y-Axis Travel 16.0 inches
Z-Axis Travel 16.0 inches

Spindle Nose to Table (~MAX) 20.0 in
Spindle Nose to Table (~MIN) 4.0 in
Spindle Max Rating 7.5 hp
Spindle Max. Speed 6000 rpm
Spindle Max Torque 33.0 ft-lbf @ 1200 rpm
Spindle Drive System Direct Speed, Belt Drive
Spindle Taper CT or BT 40
Spindle Bearing Lubrication Grease Packed
Spindle Cooling Air Cooled

Table Size 57.8 in L x 10.5 in W
T-Slot Width 0.626 in to 0.630 in
T-Slot Center Distance 4.00 in
Number of Std T-Slots 3
Max Weight on Table (Evenly Distributed) 350 pounds
Max Cutting 400 ipm

Feedrates: Rapids on X-Axis 400 ipm
Feedrates: Rapids on Y-Axis 400 ipm
Feedrates: Rapids on Z-Axis 400 ipm

Axis Motor Max Thrust X 2000 lbf
Axis Motor Max Thrust Y 2000 lbf
Axis Motor Max Thrust Z 2000 lbf

Tool Changer Type Carousel
Tool Changer Capacity 10
Max Tool Diameter (Full) 3.5 in
Max Tool Weight 12 lb
Tool-to-Tool (AVG) 5.7 s
Chip-to-Chip (AVG) 6.5 s
Air Requirements 4 scfm @ 100 psi
Inline Air Hose 3/8 in
Coupler (Air) 3/8 in
Air Pressure Min 80 psi
Spindle Speed 6000 rpm
Drive System Direct Speed, Belt Drive
Spindle Power 7.5 hp
Input AC Voltage (3 Phase) - Low 220 VAC
Full Load Amps (3 Phase) - Low 25 A
Input AC Voltage (3 Phase) - High* 440 VAC
Full Load Amps (3 Phase) - High* 13 A
Weight 5060 pounds

Equipped With
Haas TM-2P CNC Toolroom Mill, 3-Axis, 6k RPM
40 Taper, 10 Tool Capacity Carousel
Coolant Tank, Year 2011

Other machines similar to Haas TM-2P 3 Axis

1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2011
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2015
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2020
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2022