Menu

Ima Combima/K/II/R75/760/V/R3, Edge processing line

Ref : 2023849-15-MT
Condition : Used
Manufacturer : Ima
Model : Combima/K/II/R75/760/V/R3, Edge processing line
Year(s) : -
Quantity : 1
Location : Seller or machines location:
EUROPE (Western and Northern)
Last check : 31 Aug. 2019

following on both sides:
Pre-milling
Unit carrier are horizontal moveable by motor
2x motor 4,5 kW, controllable, not swivable
horizontal and vertical adjustment by Siko display
motor 1 = synchronized, motor 2 = reversed

Milling unit
with Perske-motor 4,4/6,6kW 50/100Hz
motor shaft Ø 40mm x 75mm for hydroformat-tools

Milling unit
with Perske-motor 4,4/6,6kW 50/100Hz
motor shaft Ø 40mm x 75mm for hydroformat-tools

Heater L=600mm

Glueing drive
Adjustment by NC-axis
glue application with qiuck lock
4-fold pressure zone up to 3,0 mm
horizontal moveable by pneumatic pressure
12-fold magazine
- 8x 3mm
- 4x 1,3 mm
12-fold coil magazine Ø=850mm

Trimming unit
for trimming of front and rear edge/stripe projection, flush or chamfer
with controllable side tracing,
electro-pneumatic positioning for 2 edge thickness (for chamfer trimming)
with front and rear motor 200W, 400V, 200Hz, 12.000 rpm.
for chamfer trimming 0,4mm, pre-trimming 1,5/2/3mm
feed speed horizontal by servo-drive

Milling unit
for pre-milling
with top + bottom motor 1kW, 400V, 200Hz, 12.000U/min. (HSK-adapter)
with side tracing
with height tracing top + bottom
with Siko-displays vertical + horizontal
vertical movement top + bottom

Multi processing unit
for fine- or profile milling of the upper edge
also the front + rear vertical edge
with hight and side tracing.
With automatical program change.
for profile-/chamfer milling of 3 radii and 1 chamfer of 15°
with a Perske-motor 660W, 400V, 200Hz, 12.000 rpm.

Multi processing unit
for fine- or profile milling of the lower edge
also the front + rear vertical edge
with hight and side tracing.
With automatical program change.
for profile-/chamfer milling of 3 radii and 1 chamfer of 15°
with a Perske-motor 660W, 400V, 200Hz, 12.000 rpm.

Multi profile scraping unit
for fine processing of an upper and lower milled profile
of banded PVC-edge material.
With electropneumatic 4-fold fix point adjustment
for the vertical + horizontal positioning.
Side tracing top and bottom, by pneumatic pressure.

Flat scraping device
for removal of glue waste from the workpiece surface.
with height tracing.
with manual horizontal positioning.

Copying buffing compact unit
for polishing of the front + rear vertical edge
for outer radius or chamfers.
with pneumatic on/off
for the upper + lower edge.
with 4x synchronized motors 0,25kW, 50Hz, 1.500 rpm.

Chamfer sanding / polishing unit
for cleaning of the upper + lower edge.
With two synchronized motors top + bottom 0,55kW, 50Hz, 3.000 rpm.
swivable around the horizontal+vertical axis
horizontal moveable

Smoothing unit
for smoothing of the milled and scraped PVC-edge
for R=1,3 up to 4 mm

Grooving unit
swivable 90-180°
controllable 50mm stroke
horizontal adjustment by NC-axis with controllable
swivable support for NC-axis
Perske-motor 3-4,4kW 50-100Hz KCS70.12-2D

Other machines similar to Ima Combima/K/II/R75/760/V/R3, Edge processing line

1
Location : EUROPE (Western and Northern)
Year(s) : 2005
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2005
1
Location : EUROPE (Western and Northern)