Used Tenoner, Notches, Router, Jointer, Milling and Others

Buhrs 3000 routing machine from 2006 Complete with coil stock Introma ZD-2SR saddle stitcher Busch die-cutting Year(s) : 2006 Location : EUROPE (Western and Northern)

Price : On request

(460/60/3 electrics) Location : AMERICA North (USA-Canada-Mexico)

Price : On request

SECOND-HAND ROUND END TENONER - CE RULES kw 3.75 volt. 380/50 Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

Voltage 440 V Good condition / currently in use Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Machine type: double end milling and drilling machine Blade diameter: 500 mm Engravers: lower Drill bits: 5 pe Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request

Diameter 42 cm, carbide blade, firewood Robust machine from 2019, automatic cycle. Available in early July. O Year(s) : 2019 Location : EUROPE (Western and Northern)

Price : On request

6.6 HP 220V 20 A 3 Phase Straight Knife 16″ Width Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Weight 560kg T/MIN 3000/4500/6000/7000 Max dia freeskap 220mm Max dia pennenkap 360mm Location : EUROPE (Western and Northern)

Price : On request

The T54 is a jointer that was actually developed to fulfill two missions: firstly, to perfectly plane workpie Location : EUROPE (Western and Northern)

Price : On request

Good condition Shipping footprint: 103 (length) x 45 (width) x (height) Weight: 1520 lbs Year(s) : 1989 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

(Fixed spindle router – not tiltable!) Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (re Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

Motor power 5 / 6 kW (rated current 19 A) Swivel range: -45° to +45° Max. tool diameter: 250 mm Max. slotting Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Used machine Condition: Fully workshop-tested Equipment and technical specifications: Motor: 5.5 kW Spindle d Location : EUROPE (Western and Northern)

Price : On request

Milling machine with extension table and extension Approved machine with electric height adjustment with digit Location : EUROPE (Western and Northern)

Price : On request

Can be equipped with a feed device at an additional cost Machine is as good as new Location : EUROPE (Western and Northern)

Price : On request

3 phase, 460v, 60 Hz, 30hp machine. Ready in mid-december. Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Conventional control Table size: 1,700 x 750 mm Motor power: 7.5 kW Spindle diameter: 30 / 40 mm Speed(s): 1,5 Year(s) : 2012 Location : EUROPE (Western and Northern)

Price : On request

5-axis tenoning machine Saw, 2 peeling heads, 2 standing axles. Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

Used machine Machine will be completely overhauled Table size 1100 x 880 mm Pole-changing drive motor 5/6 kW S Year(s) : 1984 Location : EUROPE (Western and Northern)

Price : On request

Single station only with (2) trim saws Opens to 8' will close to 7-8" Very good condition Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Mebor 1200 horizontal sawmill Main engine: 45 kW Log diameter: 1.20 m Frame length: 19 m Sawing length: 15 m B Year(s) : 2009 Location : EUROPE (Western and Northern)

Price : On request

La Venus Milling-Boring machine for profiles - Structure: stainless steel - Block clamping system - Moving tab Year(s) : 2010 Location : EUROPE (Western and Northern)

Price : On request

Special machinery system FRIULMAC for the construction of garden sheds, chalet and wood structures with the BL Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

Great Working Condition Recently Removed From Service Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request