CR Onsrud 289G18R Pro Series

289 – 5×24 – Work Envelope
5’ x 24’ Table
Phenolic High-Flow Universal Vacuum Table System Flow-Through Spoil Board – LDF table top to be used as replaceable sacrificial spoil board. Controller
11” Z axis stroke and 15” under bridge clearance
FANUC 0i Machine Controller System with Panel-i HMI
18 HP Spindle – 4-Pole, 13.5Kw, 18HP – 24,000 RPM fully programmable & reversible, variable speed,
HSK 63F tool interface, quick-change spindle, capable of routing & drilling, programmable feed rates w/override capability
2-Position Integrated Dust Transition System – Integrated Dust Extraction hood pulls chips away from
the spindle’s nose & up a separate chamber & hood to effectively remove chips from the machining process.
(8in dust transition also provided for connecting to your dropped-in flex hose)
Automatic Directional Air Blast – Blows air on tooltip to aid chip or dust evacuation.
The direction air blows changes relative to the path of the machine. Can be turned on / off via M-Code
Standard Centralized Manual Greased Lubrication Automatic Grease Lubrication System
Roller Hold Down Option – 2 Rollers on each side of the cutting spindles, automatically extend & retract as rollers roll off cutting table,
for holding down warped sheet stock such as low grade plywood
Air Conditioned Electronics Cabinets
12 Tool – Dynamic Automatic Rotary Tool Changer
Pneumatic Controlled Pop-Up Perimeter Positioning Pin
Solenoids for Pop-Up Pin Control Tooling Measurement System Options
Auto Tool Length Touchpad Digitizer
Vacuum Pumps – (2) 10 HP Busch Mink Vac Pumps – Mounted on a rack – 406 CFM total
2022 Machine has never been run in production!
Supplied with 480 Volt Transformer and Five tool holders