Menu

Haas VF 11/50 3 Axis

Ref : 1973037-3-AW
Condition : Used
Manufacturer : Haas
Model : VF 11/50
Nb Of Axis : 3 Axis
Year(s) : -
Quantity : 1
Location : Seller or machines location:
EUROPE (Central and Eastern)
Last check : 13 Jul. 2019

Machining centers - vertical
The machine is in good technical condition, after a prior agreement,
the possibility of testing. X-axis 120.0 in 3048 mm Y axis 40.0 in 1016
mm Axis 30.0 in 762 mm Table spindle (~ max) 35.0 in 889 mm Spindle
to table (~ min) 5.0 in 127 mm Spindle SAE Metric Max. Output 30.0 hp
22.4 kW Maximum speed 7500 rpm 7500 rpm Maximum torque 340 ft-
lbf @ 700 rpm 460 Nm @ 700 rpm Two speed gearbox with 2 speed
drive Taper CT or BT 50 CT or BT 50 Lubrication of Air / Oil Injection / Oil
Injection Bearings SAE Metric Table Length 120.0 mm at 3048 mm
Width 28.0 in 711 mm T-Groove Width 0.630 in 16 mm Slot Center
Diameter T 4.92 in 125 mm Number of Std T-slots 5 5 Maximum weight
on the table (evenly spaced) 4000 lb 1814 kg Maximum cutting 360 ipm
9.1 m / min Rapids to X 360 ipm 9.1 m / min Rapids to Y 600 ipm 15.2 m
/ min Rapids to Z 600 IPM 15.2 m / min Axis Motors SAE Metric Max.
Stroke X 3400 lbf 15124 N Max. Stroke Y 4100 lbf 18238 N Max. Stroke Z
5600 lbf 24910 N Changer S.A.E Metric Enter SMTC SMTC Capacity 30 +
1 30 + 1 Max. Tool Diameter (Full) 4.0 in 102 mm Max. Tool Diameter
(adjacent empty) 10.0 in 254 mm Max. Tool length (from line) 16 to 406
mm Max. Tool Weight 30 lb 13.6 kg Tool Tool (avg) 4.2 s 4.2 s Chip-to-
Chip (Avg) 6.3 s 6.3 s General S.A.E Metric Coolant Capacity 95 gal. 360 L
Required air 4 scfm @ 100 psi 113 l / min at 6.9 bar In-line air hose 3/8
in 3/8 inch Coupling (air) 3/8 in 3/8 inch Air pressure min 80 psi 5, 5 bar
SAE Metric electrical specifications Spindle speed 7500 rpm 7500 rpm
Two speed gearbox with 2-speed drive system Spindle power 30.0 hp
22.4 kW Input AC (3 phases) - Low voltage 220 VAC 220 VAC Full load (3
phases) - Low 70 A 70 A Input AC (3 phases) - High 440 VAC 440 VAC Full
load (3 phases) - High 35 A 35 A