Menu

Ima FBA/II/R75/260

Ref : 2376163-15-MT
Condition : Used
Manufacturer : Ima
Model : FBA/II/R75/260
Nb Of Axis : -
Year(s) : 2002
Quantity : 1
Location : Seller or machines location:
EUROPE (Western and Northern)

Double-sided format processing machine for formatting / profiling of plate-shaped workpieces

Technical specifications:
min. workpiece thickness approx. 4 mm
max. workpiece thickness approx. 70 mm

Veneer protrusion approx. 6 mm
Workpiece thickness approx. 12 mm

min. workpiece protrusion from the chain conveyor approx. 10 mm each side
max. workpiece protrusion from the chain conveyor approx. 80 mm each side
min. passage width with workpiece protrusion 10 mm

a. Longitudinal processing without mounted counter-holding rollers and support rails between the chain tracks 180 mm
b. Longitudinal processing with mounted counter-holding rollers and support rails between the chain tracks for transverse processing 210 mm
c. Cross machining only applies to machines with 320 mm cams min. workpiece width at 15 mm projection and one-sided processing only on the left side of the machine,
with workpiece length approx. 1000 mm, part thickness 10-28 mm 80 mm

The performance data refer to the basic machine and can change due to the following units.
The soil conditions must comply with the foundation guidelines.
with cams 1080 mm prepared for cam spacing 540 mm

Working width: 3800 mm
Standard equipment of the basic machine
without processing units and
without any other accessories

2 low-maintenance precision roller chains with a width of 75 mm and 85 mm long chain plates
In the case of machines with cams, these are activated via cam ejectors
pneumatically adjusted to a height of 6, 12 or 18 mm.
The same goes for each or multiple cam spacing.
Standard cam spacing 1080 mm

2 top prints height adjustable via precision guides each with a V-belt 32 mm wide
Switching elements in a separate control cabinet,
Control elements placed in a separate control panel.
The cable connection between the control cabinet and the machine takes place on the floor.

Left-hand machine
Main voltage: 3 / N / PE, 400/230 V, 50 Hz,
with resilient neutral conductor
Control voltage: 24 V DC / 230 V AC

Machine labeling: German
Main drive with stepless electronic speed control for the feed speed = workpiece transport
Feed speed V = 6 - 30 m / min.
Electronic width adjustment via pole-changing
Asynchronous three-phase motor with electronic dimension preselection and tolerance monitoring (approx. 2.8 m/min.)

Upper pressure adjustable in height by means of an electric motor

Feeder can be folded up by hand
Mechanical digital display for lateral adjustment the workpiece overhang on the left side of the machine
Chain track extension for 1000 mm long parts


Equipment each side:
Aggregate carrier with horizontal NC adjustment,
for setting up 1 milling stand, 750 mm high

Scoring saw unit controllable, not pivotable,
with mechanical digital display for the vertical and horizontal adjustment
without tools
Motor 2.2 kW, 100 Hz, KNS 51 horizontal adjustment with mechanical digital display
Milling stand, 750 mm high
mechanical digital display for vertical adjustment

Chipping unit not controllable,
with 1 motor 400 V, 100 Hz, 6000 rpm. without tools
horizontal adjustment with mechanical digital display
Motor shaft for using the Hydro-Format tool system

Double milling stand, 1050 mm high both stand sides assignable
electronic positioning control for a stepless vertical adjustment

Milling / profile milling / grooving unit
with 1 motor 100 Hz, 6000 rpm.
without tools
controllable, stroke 25 mm,
swiveling by hand,
with synchronous and counter-rotating function
electronic positioning control for stepless horizontal adjustment
Motor shaft for using the Hydro-Format tool system

Milling / profile milling / grooving unit
with 1 motor 100 Hz, 6000 rpm.
without tools,
controllable, stroke 25 mm
electronic positioning control for a swivel of 90 - 190 °,
with synchronous and counter-rotating function,
with parking position 75 °,
only in connection with horizontal and vertical NC adjustment
electronic positioning control for stepless horizontal adjustment
Motor shaft for the use of the hydro format tool system

Sound absorption / extraction hood with lighting
Format processing with a partition
Pull-out device, 390 mm long
Center support, with 1 roller conveyor

Electronics:
ICOS open
PC / software based control system for automation of manufacturing facilities.
- "Windows 2000 professional" operating system
- Basic system IPC 11
- Industrial PC, protection class on the front IP 54

Other machines similar to Ima FBA/II/R75/260

1
Location : EUROPE (Western and Northern)
Year(s) : 2004
1
Location : EUROPE (Western and Northern)
Year(s) : 1999
1
Location : EUROPE (Western and Northern)
Year(s) : 1997
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1998