Menu

Okamoto IGM-2M

Ref : 2167251-3-MT
Condition : Used
Manufacturer : Okamoto
Model : IGM-2M
Year(s) : 2000
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

Okamoto IGM-2M Internal Grinding Machine
New - 2000

SPECIFICATIONS:
Internal Diameter to be Ground.....................................0.24" - 8"
Grinding Stroke - Maximum..................................................8"
Swing Over Table..........................................................24"
Swing Inside the Workpiece Guard..........................................14"
Longitudinal Travel.......................................................20"
Table Speed..................................................1.6 - 50 ft/min.
Rapid Feed Rate.......................................................600 IPM
Hydraulic Stroke.................................................0.08" - 8.0"
Reversals at.............................................0.08" Stroke300/Min.
Work Spindle Swivel Angle................................(-5) - (+30) Degrees
Work Spindle Speed...............................................50 - 850 RPM
Crossfeed Travel - Maximum...............................................9.4"
Feed Increment Diameter - Minimum.....................................0.0001"
Automatic Feed Range..........................................0.01 - 0.16 IPM
Rapid Feed Rate.......................................................200 IPM
Wheel Spindle Motor......................................................3 HP
Workhead Spindle.........................................................2 HP
Crossfeed Servo........................................................0.4 HP
Hydraulic Pump...........................................................3 HP
Hydraulic Pump Capacity............................................16 Gallons
Actual Dimensions..........................................96"L X 50"W X 78"H
Actual Coolant/Hydraulic System Dimensions.................62"L x 46"W x 49"H
Approximate Weight.................................................6,200 Lbs.

EQUIPPED WITH:
Okamoto OH-20M, 20,000 RPM Oil Mist Lubricated ID Spindle
Automatic Grinding Cycles
Size Compensation
Wheelhead, Table and Speed Setting Dials
Continuous/Intermittent Feed
Minimum Wheel Size Setting
Repeat Dress, Interrupted Dressing and Dressing Selection
Hydraulic System
Books, Manuals, and Drawings

Other machines similar to Okamoto IGM-2M

1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2002
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1982
1
Location : EUROPE (Western and Northern)
Year(s) : 2008
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2000