Wean 13" OIL HYDRAULIC EXTRUSION PRESS WITH PIERCER

WEAN UNITED, COPPER
13" OIL HYDRAULIC EXTRUSION PRESS WITH PIERCER
Year - 1981

5000 Ton
Oilgear upgrade - 2000
Tie Rods - 4
4-post design
Billet Heating -

2 - Billet Conveyor System
Billet Pre-heat furnaces
gas fired
blower fans
exhaust system
hydraulic load bar

Hydraulic System
2 - 2000 Ajax Magnethermic
Model Unit A, S/N H-2P150-C
Model Unit B, S/N H-2P150

Induction furnaces
Electric type
1,400-KW capacity
60-second cycle

Transfer conveyor
Cutler-Hammer programmable logic control
Control panel S/N H-2P15-J
52-Gallons per minute water flow
Input
550/605 volts
1792-KVA
2,175 maximum amperes

Output
1,250 volts
3,313-KVA
2,650 maximum amperes
1,600 KW
5,000 ton capacity
Oil hydraulic
507 ton advance piercer
320 ton return piercer
800 ton advance slide rams
320 ton return slide rams
75" main and side rams stroke
41" piercer ram stroke
18" container shifting rams stroke
13" per second rapid advance main ram speed
11.8" per second return main ram speed
2" per second +/- .6" (typical) extrusion speed
9.8" per second advance piercer speed
10.8" per second return pierder speed
6.5" opening container speed
4.7" closing container speed
8.8" minimum billet diameter
13.7" maximum billet diameter
29.5" billet length
6.8" outside diameter maximum extrusion
33.8" container length
107 HP container heater
422 HP main pumps
25 HP ceiling pumps
20 HP saw


Control Panel - Upgraded by Oilgear, 2000
Allen Bradley Controls, 2000
Oilgear automation systems programmable logic control

Hydraulic System Room, including but not limited to -

7 - Rex Roth Pumps
315 KW
50 cycle
500 volts
1475 RPM

7 - Asea pumps - 140 HP motor, skid mounted
2 - Asea pumps - 40-HP motor
2 - Asea pumps - 15-HP motor
1 - Pump, hydraulic fluid, w/ (2) 30-HP motors
1 - 2004 Husky Pro Model VT631402AJ air compressor