Menu

Weeke BMP 195

Ref : 2340639-15-MT
Condition : Used
Manufacturer : Weeke
Model : BMP 195
Nb Of Axis : -
Year(s) : 2000
Quantity : 1
Location : Seller or machines location:
EUROPE (Western and Northern)

Technical data:

Space requirement
- length approx. 11.950 mm
- width approx. 5.300 mm
- height approx. 2.580 mm

Support table
- Length approx. 6,250 mm
- width approx. 1.300 mm
- height approx. 100 mm

Travel
- X-axis 7,950 mm
- Y-axis 1.844/1.240 mm
- Z-axis 400 mm

Speed
- X-axis 80 m/min.
- Y-axis 80 m/min.
- Z-axis 20 m/min.

Pneumatics
- Compressed air 6 bar

Electronics
- Operating voltage 3 x 400 Volt
- frequency 50/60 Hz
- Total connected load approx. 21.5 kW

Workpiece clamping
- 1 piece vacuum pump with 100 m³/h capacity
- 8 pcs. workpiece support consoles infinitely variable in X-direction
- 8 workpiece stops fixed to the machine frame
- 8 workpiece stops mounted in the workpiece supports
- 4 pieces of side stops mounted in Y-direction on an aluminum profile
- 4 pieces rear stop cylinders
- 8 pieces controlled workpiece insertion aids
- 2 pieces center stop consoles with 2 cylinders each
- 1 set of scales and pointers on the workpiece supports in X and Y direction
- 16 pieces large-area vacuum suction cups, manually hose-free freely positionable
- 8 pieces vacuum suction cups for narrow parts, manually hose-free freely positionable

Vertical drilling technology
2 pieces vertical drilling units 32 spindles
- feed stroke 40 mm
- drive 1,5 kW
- drill holder d=10 mm
- drilling depth max. 38 mm
- total drill length 70 mm
- drill diameter max. 20 mm / max. 35 mm

Milling motor
1 tool change spindle 9 kW -HSK F63
- speed range: infinitely variable 1.250 1/min - 24.000 1/min, programmable
- Drive: frequency controlled three-phase motor
- drive power: 7,5 / 9 kW in continuous and intermittent operation

Tool change magazine for 8 places
- tool diameter: max. 100 mm at full capacity
- possible tool diameter: max. 160 mm with smaller tool diameters or free space on the secondary stations

Hardware system HOMATIC 2000 IPC
WoodWOP 4.5 "Silverstone" software

1 hand terminal to control the machine
Hand terminal with potentiometer and emergency stop switch to control the machine

Grooving saw for X-direction
- Speed 4.125 1/min.
- Direction of rotation right
- power 1,5 kW

horizontal drilling gear with 6 spindles
individually callable
With separate drive 1.5 kW, 3 spindles each arranged left and right in X-direction

Aggregate interface for the main spindle

HSK 63 drilling, 7 spindles (grid 32 mm)
not individually callable
- direction of rotation right/left
- Speed 4.500 1/min.

Vertical. Indenting unit for threaded sockets

Other machines similar to Weeke BMP 195

1
Location : EUROPE (Central and Eastern)
1
Location : EUROPE (Western and Northern)
1
Location : EUROPE (Central and Eastern)
Year(s) : 2013
1
Location : EUROPE (Western and Northern)