Cantek GT-635ARD

Ref : 2242603-15-MT
Condition : Used
Manufacturer : Cantek
Model : GT-635ARD
Year(s) : 2015
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

Electrical 460V, 3 Ph, 60 Cy

Heavy duty cast iron machine body and table for vibration free running
Cutterheads are spiral insert type with six (6) rows of carbide inserts.
These cutterheads produce an excellent finish, run much quieter than conventional straight knife heads, and require less HP to perform the planing operation.
The inserts are an industry standard item, and have two (2) cutting edges.
The conveyor feed system uses a spring loaded pin arrangement to pass material over the bottom jointing head.
A driven rubber top roll, after the top head, delivers the material out of the machine.
Variable feed speed by frequency inverter
Infeed bed roller is idle
(3) Bottom full width bed rolls (2 driven and 1 idle) also included � really improves feeding of difficult materials
Digital electronic thickness adjustment in INCH and MM. Inch is to 3 deicimal places
Opening of the machine is motorized, and driven by a 1/2 HP TEFC motor
Swiveling control panel for more ergonomic access to machine controls (Not shown)
Easy to access external handwheel adjustment of infeed bed
The table surface is hard chrome plated and precision ground for smooth performance and maximum wear resistance at high speeds
A hand lubricator is provided for convenient lubrication to the table slideways and an auto lubricator provides lubrication to the caterpillar feed chain
Chipbreaker and top feed roller into top head is sectional
Rubber outfeed top roller to prevent chip marking
Over thickness safety shut-off bar across infeed.
Amp meter for each motor on control panel to monitor motor load
Side covers to protect operator around bottom head
Star Delta soft start
Isolator switch to shut off power to control panel for added safety.

Maximum working Width: 25"
Maximum working Thickness: 8"
Minimum workpiece length: 12.2"
Minimum working thickness: 0.315" (10mm)
Bottom jointing head motor: 20 HP TEFC
Top planing head motor: 25 HP TEFC
Feed motor: 5 HP
Table elevation motor: 1/2 HP
Cutterhead diameter: 4"
Knife information: 30mm x 12mm x 1.5mm (90 per head - 180 pcs. total)
Cutterhead speed: 5400 RPM
Feed speed (variable): 23 to 65 FPM
Dust collection: (2) 6" diameter
Table size: 27" x 103" x 32" high
Machine dimensions (LxWxH): 105" x 45.1" x 67.7"
Net weight: 6600 lbs.
Electrics: 460/3/60 (69.7 Full Load Amps)
Excellent Condition - Barely Used!

Other machines similar to Cantek GT-635ARD

Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2000
Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)