SCM K203F

EDGE BANDING MACHINEMACHINE COMPOSITION:
- Reel tray for edge roll
- Pneumatic pre-cut guillotine up to (thickness x width) 3x45 mm
- Gluing station with EVA Tray - PUR Granules
- Group of masking (pressing) with 3 rollers including 1 Motorized
- End-cutting unit with 0-15° tilting saw-mill
- Trimming aggregate above/below 1/4 round 12000 rpm
- Trimming unit above/below chamfer 12000 rpm
- Radius scrapers
- Polishing station with textile polishing disc

MACHINING CAPABILITIES:
- Panel thickness: 8 to 55 mm
- Minimum panel width: 65 mm
- Minimum panel length: 140 mm
- Acceptable edgebanding: 0.4 to 3mm in rolls, minimum length 250 mm
- Extendable work table: x 770 mm
- Projection of the part in relation to the transfer chain (protrusion of the panel): 25 mm
- Drive (feed rate): 10 m/min
- Manual height adjustment, digital counters
- Electrical control of operations

OTHER MACHINE FEATURES:
- General power supply: 380v. Three-phase+N 50 Hz
- Total installed power: In max 29A
- Cutting motor: 0.35 kW
- Drive motor: kW
- Trimming Motors Group (milling): 4x 0.35 kW
- Polishing unit: 2x 0.35kW
- Air supply required
Suction:
- Upper suction mouth: Ø 60 mm
- Lower suction mouth: Ø 120 mm int.
- CE marking
- Padlockable contactor, Mushroom stops

Dimensions: 3.35 x 0.75 x h. 1.35m
Weight: 890kg