Doosan Fanuc Oi-T Control 3500 rpm Puma GT 2600 2 axis

Ref : 2178131-3-MT
Condition : Used
Manufacturer : Doosan
Controller : Fanuc Oi-T Control
Spindle Speed : 3500 rpm
Model : Puma GT 2600
Nb Of Axis : 2 axis
Year(s) : 2018
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

Doosan Puma GT 2600
Year: 2018

Controller: Fanuc Oi-T Control
Puma GT2600 turning centers are designed for heavy and interrupted cutting, long-term high
accuracy and superior surface finishes. The oversized spindle bore and draw tube can
accommodate bars up to 3.0" diameter. High speed turret indexing and fast rapid traverse rates
minimize non-cutting time. Classic manufacturing methods and ultra-rigid construction are
combined with advanced technological features to provide exceptional value.

Rigid 30 degree one piece cast iron slant bed
Wide box way construction with Turcite-B anti-friction way surfaces
High precision, pre-tensioned X & Z axes double nut ball screws with electric torque
limiter protection
12 station heavy duty servo controlled turret (.15 second turret swivel)
25 hp high speed - high torque digital AC spindle motor
Large 18.1" maximum turning diameter
Large 3.19" bar capacity
25.9" maximum turning length
Fast 1,181 ipm Z axis rapid traverse
Full sliding cover protection for tailstock guide ways
Bolt up chip conveyor design for easy access and removal of coolant tank
FANUC Oi-T control with swiveling operator's panel
Doosan EZ Guide i Conversational Programming
Doosan Tool Load Monitoring System

Turret Holder Part Description Quantity
850418-00864 Tool holder - OD Extended - (R & L) (1" sq) 2
L32510647C Tool holder- OD Face - (R & L) (1" sq) 2
L31510617A Tool holder - OD - Wedge clamp (1" sq) 2
L32510637G Tool holder - ID - 2.000" ID 6

Max Swing Over Bed 24.8 IN
Swing Over Carriage 18.1 IN
Max Turning Diameter 18.1 IN
Max. Turning Length 25.9 IN
Distance Between Spindle Nose and Tailstock 33.19 IN

Slant Bed Angle 30 Degree
X-Axis Travel 10.43 IN
Z-Axis Travel 26.8 IN
X Axis Guide way span 10 IN
Z Axis Guide way span 14.2 IN
X Axis Rapid Traverse Rate 945 IPM
Z Axis Rapid Traverse Rate 1181 IPM
X Axis Ball Screw Diameter 1.26 IN
Z Axis Ball Screw Diameter 1.57 IN
X Axis Feed Thrust (Continuous) 1520 IB
X Axis Feed Thrust (Intermittent) 2127 IB
Z Axis Feed Thrust (Continuous) 2791 IB
Z Axis Feed Thrust (Intermittent) 3907 IB
X Axis Repeatability +-0.00008 IN
Z Axis Repeatability +-0.00012 IN

Turret Station 12
Tool Holder Type DI Base Holder
Turning Tool Shank Size 1 IN
Boring Bar Diameter 2 IN
Turret Index Time 0.15 Seconds
Tool Selection Bi-Directional
Curvic Coupling Diameter 7.99 IN
Turret Clamping Force 11915 IB
Turret Index Repeatability +-0.0005 IN

TailStock Center MT #5 Live
TailStock Quill Diameter 3.94 IN
TailStock Quill Stroke 3.94 IN
Max. TailStock Quill Thrust 2473 IB
Max. TailStock Hydraulic Pressure 580 PSI
TailStock Guide Way Span 9.25 IN

Coolant Pump Pressure 65 PSI
Coolant Tank Capacity 58 Gallon
Coolant Pump Motor 1 HP
Spindle Speed 3500 RPM

Spindle Bar Capacity 3.2 IN
Spindle Nose A2-8
Draw Tube ID 3.23 IN
Standard Chuck Through Hole ID 3.23 IN
Spindle Bore Diameter 3.58 IN
Chuck Size 10 IN

Hydraulic Tank Capacity 3.4 Gallon
Hydraulic Oil Required Mobil DTE #24 or Shell Tellus 32
Way Lubrication Tank Capacity 0.5 Gallon
Way Lubrication Oil Required Mobil Vactra #2 or Shell Tonna T68

Floor Space (LxW) 129.5 IN x 64.2 IN
Floor Space(Length With Hinge Belt Chip Conveyor) 159 IN
Machine Height 68 IN
Height From Floor to Spindle Center 41.2 IN
Voltage Required 205-235V/3 ph 60 Hz
Power Management 39 kVA (102 Amps @ 220 Volts)
Machine Weight 10364 lbs

Chip Conveyor
Coolant Tank
All Manuals

Other machines similar to Doosan Fanuc Oi-T Control 3500 rpm Puma GT 2600 2 axis

Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2012
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2014
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2015
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2006