Giben Livra Point to Point Through Feed Boring Line 4
AMERICA North (USA-Canada-Mexico)
Model: Livra Point to Point Through Feed Boring Line
-Numerically controlled point to point boring machine with drilling from the bottom of the panel.
-Set up time = 0. Machine operator can change panel sizes
panel processing requirements with zero time lost when making these changes
-Full flexibility – no limit in panel length or loss in productivity for longer panels
-Highly innovative boring process – providing immediate clean holes
Drilling is from the bottom of the panel, instead of the top
ensuring that shavings are completely & immediately removed from the holes
-The high quality side of the panel is not in contact with table-work surfaces
to ensure that the panel is not scratched
-Machine operators will require minimal training
-No adjustments required
-The boring head carriage is designed with heat-treated steel that is built heavier
and over-sized to provide more rigidity and precision for over a long period of time
Due to the large structure of the machine it is not necessary to anchor the machine to the ground
-Number of heads: 1
-Quantity of vertical spindles: 11
-Quantity of front/ back horizontal spindles: 1 + 1
-Quantity of lateral spindles: 1
-Controller: Numerically controlled with an office PC / Color LCD 17” display
-Boring range: 800 mm
-Maximum panel width: 800mm
-Quantity of controlled axis: Four (4)
-Axis X - panel movement by clamps, travelling on rollers.
-Axis Y - boring head movement.
-Axis Z - panel boring.
-Axis X¹ - micro head movement for front/back boring.
Movement is controlled in position “X” by clamps for panel feeding.
With automatic step by step panel feeding and control of DANGER ZONE from CN
The motor is controlled by an encoder through a revolver. 60 mt /1’
The control of the boring head movement is by motor with an encoder
with programmable speed and acceleration.
The control of the movement in the vertical boring and control of the height in horizontal boring
The vertical boring is made by rapid approaching and boring
Speed is programmable according to the tool’s diameter
Movement is run by a program through a motor with an encoder
The control of the micro head movement for front and back boring without moving the panel in X axis
The front and back horizontal boring is executed faster, without the need to move the panel
The X¹ axis stroke is 100 mm
-Full Boring range of 800 mm
-Minimum part width: 80 mm (3.14 in.)
-Minimum part length: 250 mm (9.84 in.)
-Minimum part thickness: 10 mm (.39 in.)
-Maximum part thickness: 40 mm (1.57 in.)
-Overall machine power req.: 12 amp
-Router collet type: ER32
-Tool diameter: 2 mm – 20 mm
-Automatic Side Pusher