Homag Optimat KAL210/6/A20/S2
EUROPE (Western and Northern)
Single-sided machine for jointing straight workpiece edges, glueing and finishing of various of various edging materials from the roll or as strips,
up to 20 mm edge thickness, in longitudinal and transverse pass.
power control PC22
Modern control system based on Windows PC
- Feed rate 18 - 25 m/min.
- Feed rate with form milling FK11 max. 20 m/min.
- Workpiece thickness 8 - 60 mm
- Edge material strip max. 0.4 - 20 mm
- Edge material roll 0.3 - 3 mm
Joint milling unit
- 2 motors each 3 kW, 150 Hz., 9,000 1/min.
for joint milling of the workpiece edge before gluing on
- electro-pneumatic control of both motors
Gluing unit A20 - 2 rollers
Quickmelt gluing unit
- Temperature control electronic with LED display
magazine 2 rolls manual
- for solid edges, strips and rolls
- 1 edge feed
- 2 roll holders
Pressure zone C
- 1 driven pre-press roll diam. 150 mm
- 6 pressing rollers diam. 70 mm
end trimming unit HL84 / 0,8 kW
- 2 motors each 0,8 kW, 200 Hz., 12.000 1/min.
- Motors can be swivelled manually for bevel cutting
Pre-milling unit 1.5 kW
- 2 motors one above the other, 1.5 kW each, 200 Hz., 12,000 1/min.
Shape trimming unit FK11 manual
- For machining the edge protrusions on the the upper and lower edge of the workpiece and for milling of the workpiece front and rear edge
Finishing unit profile PN10
- For chamfering or rounding pre-milled PVC edges
- Finishing unit glue joint
- Buffing unit
Automation package chamfer / radius KAL210/6/A20
- Automatic adjustment of infeed ruler
- Automatic adjustment of pressure zone
- Pneumatic adjustment from chamfer to straight cut
- Pneumatic adjustment of the trimming motors for flush or projection trimming
- Pneumatic adjustment of pre-milling unit for flush or projection milling
- Automatic adjustment from chamfer to radius milling for form milling
- Pneumatic adjustment PN10 / FA11
- Electronic height adjustment