Menu

Okuma Okuma OSP 5020L CNC Control with CRT 3500 RPM LNC-8 2 Axis

Ref : 2233047-3-CP
Condition : Used
Manufacturer : Okuma
Controller : Okuma OSP 5020L CNC Control with CRT
Spindle Speed : 3500 RPM
Model : LNC-8
Nb Of Axis : 2 Axis
Year(s) : 1995
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

OKUMA CADET CNC TURNING CENTER
Model LNC-8
New 1995

EQUIPPED WITH:
Okuma OSP 5020L CNC Control with CRT, RS-232 Port for DNC System,
12 Position ID/OD Tool Turret, 10" 3-Jaw Hydraulic Chuck, Programmable
Tail Stock, Part Catcher, Chip Conveyor, Coolant System.

CATALOGUE SPECIFICATIONS:
Max Swing Over Slant Bed.................................. 15.75"
Max Swing Over Carriage................................... 9.84"
Cross Travel (X-Axis)..................................... 8.23"
Longitudinal Travel (Z-Axis).............................. 19.68"
Feed Range (Infinitely Variable) ......................... .1 to 200 IPM
Rapid Traverse Rate ...................................... 591 IPM
Number of Turrets......................................... 1
Turret Positions.......................................... 12
Spindle Bore................................................ 2.5"
Spindle Nose.............................................. A2-6
Spindle Speed Range....................................... 75-3500 RPM
Spindle Drive Motor....................................... 20 HP
Electrics................................................. 240/3/60
Approximate Machine Dimension............................. 107" x 70"
Approximate Machine Height................................ 75"
Approximate Machine Weight................................ 9,900 LBS

CONDITION: Appears to be in Very Good Condition !
Machine Refurbished. Scope of work included:
-REPLACED ALL SOLENOID PLUGS (NEW)
-COMPLETE CLEANING INCLUDING SUMP
-REPLACED CRACKED CROSS SLIDE (NEW)
-INSTALLED NEW PRECISION BEARINGS ON X AXIS BALL SCREW
-ALIGNED TURRET ROTATION
-ALIGNED TURRET SQUARENESS
-REPAIRED PARTS CATCHER CYLINDER, SENSOR WIRES AND AIR TUBING (ALL NEW)
-REPLACED SPINDLE DRAW TUBE (NEW)
-REPLACED MAIN BREAKER (REFURB)
-REPLACED HEAT EXCHANGER FAN (NEW)
-X AXIS WIPER ASSEMBLIES (NEW)
-Z AXIS WIPER ASSEMBLIES (NEW)
-WIPERS ON INNER CHIP ENCLOSURE (NEW)
-STARTER AND FLUORESCENT WORK LIGHT TUBES (NEW)
-VERIFY AND CLEAN ALL FANS
-REPLACED RETURN LINE FOR ACTUATOR DRAIN (NEW)
-REPLACED OPERATOR DOOR GLASS (NEW)

Other machines similar to Okuma Okuma OSP 5020L CNC Control with CRT 3500 RPM LNC-8 2 Axis

1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2010
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2012
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2020
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2011