Menu

DMG, Mori DMC200U 5 Axis

Ref : 2283694-3-MT
Condition : Used
Manufacturer : DMG, Mori
Model : DMC200U
Nb Of Axis : 5 Axis
Year(s) : 2003
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

DMG MORI DMC200U
Year 2003

CNC Control yes
Type of CNC Control SIEMENS 840D
# Axis 5
X 70.87 inches
Y 78.74 inches
Z 43.31 inches
Volume Machining Area 3,960 dm3
A-Axis Trunnion Tilt Range -10 to +120 degrees
C Axis 360 x 0.001 degrees
# ATC 120
Taper HSK-A-100
Max Table Load 7716 pounds
Rotation range of table 360 x 0.001 degrees (full 4th axis)

5th AXIS MILLING SPINDLE NC Controlled A-axis milling head. 2 seconds swivel time Horiz.-Vertical Head
swivels from horizontal to vertical & vertical to horizontal position In addition head has a NC Controlled swivel
angle from vertical position 0 degrees to the front 30 degrees past horizontal, 10 degrees to the back in the
direction of the gantry Z-axis-130 degrees in total (-10/+120)

MAIN SPINDLE DRIVE Type - AC controlled/digital
Power 40% duty cycle (S3) 59 HP (44 kW)
Power 100% duty cycle (S1) 42.9 HP (32 kW)
Speed range (spindle) 20-10,000 rpm, no gear steps (motor spindle)
Maximum spindle torque 212 lb ft (288 Nm)
Spindle bearing diameter front 3.94" (100 mm)
Spindle Taper HSK-A100
Swivel moment milling spindle (100% duty cycle) 5,554 lb/ft (7,530 Nm)
Holding moment (40% duty cycle) 6,144 lb/ft (8,330 Nm)
Swivel time from vertical to horizontal & horizontal to vertical 2 sec.
Positional uncertainty: P (VDI/DGQ 3441) 9 arc sec
-FEED DRIVES- Type - Brushless AC/Digital
Feed rate 0.04-590 IPM (1-15,000 mm/min)
Rapid feed (x-y-z) 2,362 IPM-1,574 IPM-1,574 IPM (60-40-40 m/min)
Acceleration (x-y-z) 6/4/4 m/s-2
Feed power (x-y-z) 15 kN
Ballscrews x/y/z 63x30/80x30/63x30 mm
120 POSITION VERTICAL CHAIN STYLE TOOL CHANGER Number of pockets - 120
Maximum tool weight 44 lb (20 kg)
Maximum tool diameter without free pockets 4.33" (110 mm)
Maximum tool diameter with free pockets 9.05" (230 mm)
Maximum tool length 17.72" (450 mm)
COOLANT PUMP Pump output external jets........ 15.85 gallon/minute (60 liter/minute)
Pump pressure external jets - 21.76 PSI (1.5 bar) Pump output chip rinsing........ 47.55 gallon/minute (180 liter/minute) Tank volume..................................... 238 gallon (900 liter)
COOLANT THRU THE SPINDLE Pressure - 580 PSI (40 bar)
Machine weight with table and pallet changer 77,600 lbs
Machine Weight - Load on machine base including 2 x workpiece weight 83,600 lbs

Control: Seimens 840D
Automatic pallet changer with 2 pallets total
120 Position Tool Changer
BLUM Laser tool length measuring and broken tool detection
RENISHAW MP700 infrared parts measuring probe

Other machines similar to DMG, Mori DMC200U 5 Axis

11
Location : EUROPE (Western and Northern)
Year(s) : 2010
1
Location : EUROPE (Western and Northern)
Year(s) : 2008
6
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2017