Ref : 1841277-9
Condition : Used
Manufacturer : Allwin21
Model : -
Year(s) : -
Quantity : 0
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)
Last check : 26 Nov. 2019

Allwin21 Corp. AccuThermo AW 810 RTP

Wafer Size: Small~8 inch
Type: Desktop, Atmospheric
Temperature: 100~800°C or 450~1250°C
Gas Lines: 1 ~ 4 lines

AW 810 Specification:
Wafer handling: Manual loading of wafer into the oven, single wafer processing.
Wafer sizes: 2″, 3″, 4″ ,5″ , 6″ ,8″ wafers.
Ramp up rate: Programmable, 10°C to 200°C per second.
Recommended steady state duration: 0-300 seconds per step.
Ramp down rate: Programmable, 10°C to 250°C per second. Ramp down rate is temperature-and-radiation-dependent and the maximum is 125°C per second.
Recommended steady state temperature range: 150°C – 1150°C
ERP temperature accuracy: ±1°C, when calibrated against an instrumented thermocouple wafer (ITC).
Thermocouple temperature accuracy: ±0.5°C
Temperature repeatability: ±0.5°C or better at 1150°C wafer-to-wafer. (Repetition specifications are based on a 100-wafer set.)
Temperature uniformity: ±7°C across a 8″ (200 mm) wafer at 1150°C. (This is a one sigma deviation 100 angstrom oxide.) For a titanium silicide process, no more than 7% increase in non-uniformity during the first anneal at 650°C to 700°C.
Process/Purge gas inputs: Any inert and/or non-toxic gas regulated to 30 PSIG and pre-filtered to 1 micron. Typically, Nitrogen (N2), oxygen (O2), argon (Ar), and/or helium (He) are used.

Other machines similar to Allwin21

Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)